Every feature is designed to your needs. The Wavetek Model 3510 Programmable Signal Generator offers a unique approach to signal generator control. From the chassis up, the Model 3510 is designed to be easily adaptable to your application needs. Its frequency range of 1 to 1040 MHz covers a wide spectrum of testing requirements, and the 100 Hz resolution (.001% accuracy) provides the precision you need. Frequency settling time is typically just 40 milliseconds. Other programmable generators might take as long as 2 seconds. If you want more than the standard 0.2 ppm/hr stability a variety of high-stability external/internal reference options are available. The RF output power can be set in 0.1 dB steps, from -137 dBm to +13 dBm with a flatness of ±1 dB. Internal modulation can be set to any frequency between 80 Hz and 10 kHz in 10 Hz increments. But the most important feature is how easily all this performance can be put into action. Let us show you how. We've redefined programmability. High-speed GPIB programmability is standard with the Model 3510. Every control function except the on/off switch is accessible from the bus. Wavetek programming conventions let you send instructions in free format. A non-volatile memory can store up to 32 complete front- panel setups for fast test sequences. With these stored settings, a completely new setup can be output by a single instruction. The Model 3510 executes GPIB commands very quickly. Successive frequency changes can be executed in 75 msec.