Thurlby Thandar Instruments TTI 1705 Digitale multimeter
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Thurlby Thandar Instruments TTI 1705 ?
Als je nog andere handleidingen hebt voor de
Thurlby Thandar Instruments TTI 1705 kun je hier de bestanden uploaden .
Model:
1705
Datum:
2009
Categorie:
Groep:
Omschrijving:
PROGRAMMABLE TRUE RMS MULTIMETER
Informatie
This programmable true RMS multimeter has dual measurement capability and a dual display † which can show either two independent measurements, a measurement together with its range or a measurement with one of the many calculated functions available.
The key features are:
• Large, high contrast, liquid crystal dual display.
• 0.04% basic accuracy, 12000 counts.
• Manual or autoranging.
• DC and AC Volts, DC and AC current, Resistance, Capacitance, and Frequency measurement; Continuity and Diode checks.
• True RMS AC and AC+DC measurement.
• Display nulling and Ohms null.
• Touch hold mode - holds onto a stable reading until updated.
• 100 point data logger.
• Measurement post-processing to give:
dB and power measurement with settable reference impedance
percentage deviation from a user-entered reference
linear scaling with offset
limits comparison for go/no go testing
automatic storage of minimum and maximum readings.
• Remote control via addressable RS232 (standard) or GPIB (factory-fit option) interfaces.
• Closed case Software calibration.
• Fully compliant with EN61010-1 Safety and EN61326 EMC standards.
† Licensed under U.S. Pat. 4,825,392
2
Handleidingen type:
Gebruikershandleiding
Pagina’s:
46
Grootte:
890.24 Kbytes (911602 Bytes)
Taal:
french
Herziening:
Issue 3
Handleidingen-ID:
48581-1161
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 03
MD5:
13a49d3a9c7fd90d3a67beafdd3c6da6
Downloads:
857
Informatie
Introduction 2
Spécifications 3
Sécurité 9
CEM 11
Installation 12
Exploitation générale 14
Exécution des mesures de base 18
Mode de mesure double 21
Fonctions évoluées 23
Acquisition des données et impression 27
Etalonnage 29
Maintenance 30
Commande a distance 31
Commandes à distance 37
Réglages par défaut 44
1
Handleidingen type:
Gebruikershandleiding
Pagina’s:
46
Grootte:
355.49 Kbytes (364018 Bytes)
Taal:
french
Herziening:
Issue 4
Handleidingen-ID:
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2015 05 08
MD5:
22f150002536e0007e9209ce89f5e78a
Downloads:
468
Informatie
Introduction 2
Spécifications 3
Sécurité 9
CEM 11
Installation 12
Exploitation générale 14
Exécution des mesures de base 18
Mode de mesure double 21
Fonctions évoluées 23
Acquisition des données et impression 27
Etalonnage 29
Maintenance 30
Commande a distance 31
Commandes à distance 37
Réglages par défaut 44
Handleidingen type:
Gebruikershandleiding
Pagina’s:
43
Grootte:
896.44 Kbytes (917959 Bytes)
Taal:
english
Herziening:
Issue 9
Handleidingen-ID:
48581-1160
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 02
MD5:
50fb8d877ac4ac347b8035b08726c34d
Downloads:
578
Informatie
Introduction 2
Specifications 3
Safety 8
EMC 9
Installation 10
General Operation 12
Making Basic Measurements 16
Dual Measurement Mode 19
Advanced Features 21
Data Logging and Printing 25
Calibration 27
Maintenance 28
Remote Operation 29
Remote Commands 34
General Commands 34
Main Display Commands 35
Dual Measurement Mode Commands 37
First Level Modifier Commands 37
Second Level Modifier Commands 38
Data Logging Commands 40
Calibration Commands 40
Default Settings 41
1
Handleidingen type:
Gebruikershandleiding
Pagina’s:
43
Grootte:
359.75 Kbytes (368380 Bytes)
Taal:
english
Herziening:
Issue 10
Handleidingen-ID:
48581-1160
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 03
MD5:
b611b44aeebbf3fb20f59e62dd82716e
Downloads:
607
Informatie
Introduction 2
Specifications 3
Safety 8
EMC 9
Installation 10
General Operation 12
Making Basic Measurements 16
Dual Measurement Mode 19
Advanced Features 21
Data Logging and Printing 25
Calibration 27
Maintenance 28
Remote Operation 29
Remote Commands 34
General Commands 34
Main Display Commands 35
Dual Measurement Mode Commands 37
First Level Modifier Commands 37
Second Level Modifier Commands 38
Data Logging Commands 40
Calibration Commands 40
Default Settings 41