Tektronix TCPA400 Versterker
Fabrikant:
Afbeelding 1 van 1
Als je nog andere foto's of handleidingen hebt voor de
Tektronix TCPA400 kun je de bestanden hier uploaden .
Model:
TCPA400
Datum:
Categorie:
Groep:
Omschrijving:
Informatie
The TCPA300 and TCPA400 current Probe amplifiers let you use one Probe to
simultaneously measure AC and DC current. The amplifiers convert the sensed current into a proportional voltage signal that you can measure directly with an Oscilloscope.
The TCPA300 and TCPA400 current Probe amplifiers provide better linearity
than other current measurement systems because of a current feedback process used with the Probe. DC measurement capability and high bandwidth allow the amplifiers to accurately represent square waves and fast-rise signals.
The TCPA300 and TCPA400 and associated probes provide these features:
Simultaneous DC and AC current measurements up to 750 A peak
High sensitivity
One-button autobalancing and Probe degaussing
No adjustments needed to match a current Probe to an individual Amplifier
AC or DC coupling of signal
Direct scaling and unit readout on compatible TEKPROBE level II oscilloscopes
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
205
Grootte:
2.34 Mbytes (2454667 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
071-1183-03
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2019 09 28
MD5:
3f212ee87757a6e92da801329992a9c9
Downloads:
1457
Informatie
This document applies for firmware version 1.0 and above.
This Instruction Manual supports the operation and basic maintenance of the
TCPA300 and TCPA400 Current Probe Amplifiers, and the TCP300/400 Series
AC/DC current probes that mate with the amplifiers.