Marconi TF 2600 Analoge multimeter
Fabrikant:
Afbeelding 1 van 5
Afbeelding 2 van 5 uploaded by: Harald Gyo
Afbeelding 3 van 5 uploaded by: Harald Gyo
Afbeelding 4 van 5 uploaded by: Harald Gyo
Afbeelding 5 van 5 uploaded by: Harald Gyo
Als je nog andere foto's of handleidingen hebt voor de
Marconi TF 2600 kun je de bestanden hier uploaden .
Model:
TF 2600
Datum:
Categorie:
Groep:
Omschrijving:
AC Voltmeter
Informatie
INTRODUCTION
The TF 2600 is a wide-range a.c. voltmeter of high sensitivity and stability; 12
ranges, giving full-scale deflections from 1 mV to 300 V, enable voltages down
to the order of 100 to be measured.
An amplifier-rectifier type instrument, it maintains good accuracy with
moderately distorted waveforms. A cathode follower input stage, with
associated attenuators, regulates the signal level to a four-valve Amplifier,,
the output of which energizes a moving coil meter via a full-wave crystal
rectifier.
The meter is calibrated in terms of the r,m* s* value of a sinewave, but
responds to the average value; it is also calibrated in decibels relative to 1
mW in 600ft, giving a range of -72 to +52 dBm.
The output of the Amplifier section is made available at a pair of f ront-panel
terminals. This provides a pre-amplifier facility, having a response similar to
that of the instrument as a whole, with an output of up to 300 mV on any
range.
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
9
Grootte:
349.71 Kbytes (358104 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
2018 12 23
MD5:
aa9a4a7524f7327e8b863c76e9606a80
Downloads:
550