Hameg HZ65-3 Sonde
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Hameg HZ65-3 ?
Als je nog andere handleidingen hebt voor de
Hameg HZ65-3 kun je hier de bestanden uploaden .
Model:
HZ65-3
Datum:
Categorie:
Groep:
Omschrijving:
Component Tester
Informatie
- Test of semiconductors
- Test of discrete components
- Rugged and compact
In conjunction with an Oscilloscope, the
component tester HZ65 can be used to test
semiconductor components, resistors,
capacitors and inductors not only out-of-
circuit, but also often without desoldering
them from circuit boards. Within certain
limits, testing of integrated circuitry is also
possible. Transistors can be plugged into
two 3-point sockets; any combination of 2
contacts may be selected for testing.
This simplifies testing of different internal
transistor paths (base-emitter, emitter-
collector, base-collector). Components with
larger-diameter leads and ICs are connected
to the 2 jacks on the side of the HZ65 using
2 test cables. The direction of current flow
through the tested component or IC can be
reversed. The HZ65 is particularly indi-
spensable for repairs of electronic devices,
providing good-bad information within
seconds. This also allows quick comparison
of the unit under test with a known good
component or network.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
10
Grootte:
193.88 Kbytes (198534 Bytes)
Taal:
english, german
Herziening:
Handleidingen-ID:
27-0065-0310
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2018 12 22
MD5:
a44c0ece05df0319944b162f8cdedb47
Downloads:
701