Drake MN-2000 Ander
Fabrikant:
Afbeelding 1 van 1
Als je nog andere foto's of handleidingen hebt voor de
Drake MN-2000 kun je de bestanden hier uploaden .
Model:
MN-2000
Datum:
1975
Categorie:
Groep:
Omschrijving:
Matching Network
Informatie
The MN-2Ü0Ü is a wide range, impedance-matching network with
a built-in calibrated directional wattmeter and an Antenna,
switching arrangement. It is a versatile '‘tool” which
allows the maximum transfer of power to an Antenna system.
The MN—2000 impedance-matching network has the following
capabilities:
a. Measures feedline VSWR, then reduces the VSWR to 1:1 at
the Transmitter output.
b. Monitors Transmitter power output in Watts directly and
continuously.
c. Attenuates 2nd harmonic output from Transmitter by 25 to
35 dB; thus it may eliminate the need for a low-pass TVI filter.
d. Matches an Antenna to a Transmitter having fixed loading.
e. Provides optimum match with multiband antennas.
f. Precisely matches the Transmitter to an Antenna across a
complete amateur band.
g. Permits “off the air’' Transmitter tuning and Antenna
matching at low power using a dummy load.
h. Eliminates reloading the Transmitter when switching from
“barefoot.” to linear Amplifier operation as the Antenna
load can always, he 50 Ohms.
]. Matches the Transmitter output to a linear Amplifier
which does not have 50 Ohm input impedance.
j. Helps localize trouble by comparing the Transmitter
output into the Antenna and into a dummy load.
k. Provides switching for up to three separate antennas or
two antennas and a dummy load.
I. Can be switched in or out with front panel control. Front
panel controls arc provided Cot the adjustment of resistive
and reactive tuning and VSWR calibration, bandswitchiug.
selection of Watts ur VSWR functions of (he meter, and
Antenna or dummy load switching. The rear panel has a ground
post and four type SO-23V connectors, one for input, two for
outputs to antennas, and one for an alternate Antenna or
dummy load. The metering circuit employs two type 1N295
rectifiers. Frequencies outside the amateur bands can he
matched, with some reduction in the impedance range. For
highly resistive loads. VSWR well in excess of 5:1 can be
matched.
Handleidingen type:
Servicehandboek
Pagina’s:
11
Grootte:
2.23 Mbytes (2335790 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
1975 01 01
Kwaliteit:
Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
2017 08 09
MD5:
69adeb17f77678ea7cdc2e6825dc6acd
Downloads:
1117