AKG Akustische und Kinogeräte GmbH BX 5 Luidspreker
Fabrikant:
Afbeelding 1 van 1
Als je nog andere foto's of handleidingen hebt voor de
AKG Akustische und Kinogeräte GmbH BX 5 kun je de bestanden hier uploaden .
Model:
BX 5
Datum:
1980
Categorie:
Groep:
Omschrijving:
Compact Stereo Reverberation Unit
Informatie
The AKG BX 5 is a compact Stereo Reverberation Unit
utilizing the patented Torsional Transmission Line principle
(TTL). It possesses the exceptional sound qualities inherent
in our BX 20
BX 15 and BX 10 Reverberations Units, but is
compactly designed in a rackmount configuration.
The BX 5 Is a single transmission line system with stereo
inputs and outputs, both being balanced, and levels and
impedances are fully compatible with those commonly used in
broadcasting and recording.
High reverberation quality is assured through the patented
AKG Torsional Transmission Line system, with highly smooth
reverberation characteristics made possible by a series of
springs whose transmission properties have been controlled
by statistical variations of the spring parameters.
Our patented reverb system is the only reverb device ...
including live chambers . .. which does not contain any of
the dry input signal at its output, and yields flutter-free
performance.
To maintain optimal reverb quality, the TTL system also
provides a frequency-dependent decay-time characteristic.
Truly balanced reverberation Is obtainable at any decay-time
setting.
In recording studios, the BX 5 will find broad application
as a primary reverb source, yet Is economical enough to be
placed in each control room for applications from mix
auditioning to final mastering.
In broadcast studios, it may be used with "live" voice to
Increase average modulation level or station "loudness".
It will also provide enhancement and special effects in the
production of commercials.
Musicians, performers and recordlng-enthusiasts familiar
with the sound of "typical" spring reverberation units, will
find the BX 5 an affordable addition to their equipment
which far surpasses the sound heretofore available in this
price range.
The BX 5 has a number of features in common with the AKG BX
20, BX 15 and BX 10 Reverberation Units:
o Uses Torsional Transmission Line principle (patented)
o High density of resonant frequencies
o High pulse density to duplicate the many sound paths of
naturally reverberant environments
o High degree of statistical diffusion in both frequency and
time domains
o Linear frequency response for maximum range of applications
o Precise duplication of natural room reverberation effects
o Adjustable input sensitivity
o Built-in limiter to prevent overdriving of reverb input
o Built-in reverb/dry signal mixing
o No acoustic feedback ... even when placed close to monitor
loudspeakers
o No special mounting or isolation required for installation
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
18
Grootte:
2.31 Mbytes (2426755 Bytes)
Taal:
english, german
Herziening:
Handleidingen-ID:
ETL 158
Datum:
1980 12 01
Kwaliteit:
Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
2017 08 20
MD5:
b14c72f4199c9cefe4c18666740b6315
Downloads:
520
Informatie
. General Description
2. Specifications
3. Operating Instructions 3.1 . Setup procedure
3.2. Connections
3.3. Level adjustment
3.4. How to connect to associate equipment
3.5. Controls
4. Circuit Description
5. Repair Instructions
6. Circuit diagrams
7. Components location
8. Parts List