Telecommunications Techniques Corporation 43440 Interfaccia
Produttore:
Modello:
43440
Data:
1997
Categoria:
Gruppo:
Descrizione:
DS1/DS3 ATM INTERFACE

Informazioni

The DS1/DS3 ATM Interface Module enables the FIREBERD 6000 Communications Analyzer to test ATM circuits and equipment operating at the DS1 rate of 1.544 MHz as well as the DS3 rate of 44.736 MHz. The module is capable of performing the following tests: • DS 1 and DS3 physical layer analysis including line and framing error detection, alarm indicators, etc. • TC sub-layer tests include PLCP and HEC based cell mapping; PLCP alarms, statistics and error insertion; and HEC generation, checking, and erroring. • ATM layer tests include transmitting and receiving cells with a pre-defmed or user-defined payload, measuring cell round trip delay and traffic shaping conformance per ATM Forum GCRA requirements, monitoring lost or misinserted cells, generating/receiving OAM cells, and automatic scanning of active VPI/VCIs. • AAL layer tests include automatically recognizing AAL1, 3/4, or 5 activity on a selected VPI/VCI, and acquiring AAL1, 3/4 or 5 SAR PDU and AAL 3/4 or 5 CS PDU statistics. Support for IEEE 488.2 control is incorporated into the FIREBERD 6000 and can be used to control and monitor DS1/DS3 ATM Interface Module.

mostra più dettagli

Manuale d'uso
Tipo di manuale:
Manuale d'uso
Pagine:
72
Dimensione:
2.69 Mbytes (2820832 Bytes)
Lingua:
english
Revisione:
B
ID del manuale:
50-14440-01
Data:
01 novembre 1997
Qualità:
Documento scansionato, tutto leggibile.
Data caricamento:
09 gennaio 2017
MD5:
90d1856666956fec3086a480b648b779
Scaricamenti:
187

Informazioni

1 GENERAL INFORMATION ... 1-1 1.1 Manual Summary ... 1-1 L2 DS1/DS3 ATM Interface Module Overview ... 1-1 1.3 Interface Compatibility ... 1-1 1.4 Cables ... 1-2 2 Interface DESCRIPTION ... 2-1 2.1 Introduction ... 2-1 2.2 Physical Description ... 2-1 2.2.1 DS3 [N/DS3 OUT/CLOCK IN Connectors ... 2-2 2.2.2 DS1 IN/DS1 OUT Connectors ... 2-2 2.3 Self-Loop Operation ... 2-2 2.4 Timing Sources ... 2-2 3 INSTALLATION AND OPERATION ... 2-1 3.1 Introduction ... 2-1 3.2 Interface Installation ... 2-1 3.3 FIREBERD 6000 Mainframe Setup ... 2-2 3.4 Interface Setup ... 2-3 3.4.1 ACCESS Menu ... 2-5 3.4.2 TC Menu ... 2-8 3.4.3 FORMAT Menu ... 2-10 3.4.4 TX Menu ... 2-11 3.4.5 RX Menu ... 2-25 3.4.6 SCAN Menu ... 2-32 3.5 FIREBERD 6000 Analysis Results ... 2-33 3.6 Interface Status Indicators ... 2-37 3.7 FIREBERD 6000 Printer Operation ... 2-37 3.8 Auxiliary Functions ... 2-38 4 Interface SPECIFICATIONS ... 4-1 4.1 Introduction ... 4-1 5 MAINTENANCE AND SERVICE ... 5-1 5.1 Introduction ... 5-1 5.2 Maintenance . ... 5-1 5.2.1 In Case of Difficulty ... 5-1 5.3 Service . ... 5-1 5.3.1 Warranty Policy ... 5-1 5.3.2 In-Warranty Service ... 5-2 5.3.3 Out-of-Warranty Service ... 5-2 5.3.4 Equipment Return Instructions ... 5-2 A FACTORY DEFAULT SETTINGS ... A-1 A. I Introduction ... A-l B REMOTE CONTROL COMMANDS ... B-1 B.l Introduction ... B-l INDEX INDEX-1

mostra più dettagli

Comments

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image