Tektronix FG 503 Generator
Produttore:
Modello:
FG 503
Data:
1974
Categoria:
Gruppo:
Descrizione:
Function Generator
Informazioni
The FG 503 Function Generator is designed to operate in a TM 500 series power module. Low distortion sine, square and triangle waveforms from 1 Hz to 3 MHz, are available at the front panel. A +2.5 V square wave trigger also is available at the front panel. Variable dc offset of =5 V is provided. A custom timing switch position is provided. This allows the user to install a timing capacitor for custom tailoring the frequency range of the FG 503, A voltage-controlled frequency (VCF) input controls the output frequency from an external Voltage Source. The output frequency can be swept above or below the selected frequency, to a maximum of 1000:1, depending on the polarity and amplitude of the VCF input and the selected output frequency. The variety of swept and modulated signals available from the FG 503 make it especially useful for such applications as testing servo-system or Amplifier response, distortion and stability. It is also useful for FM generation or as a variable beat-frequency Oscillator. The square wave trigger output can be used as a source for TTL logic, or to synchronize an external device such as an Oscilloscope or counter.

mostra più dettagli

Servizio e manuale utente
Tipo di manuale:
Servizio e manuale utente
Pagine:
41
Dimensione:
2.57 Mbytes (2695490 Bytes)
Lingua:
english
Revisione:
First Edition
ID del manuale:
070-1727-00
Data:
01 aprile 1974
Qualità:
Documento scansionato, tutto leggibile.
Data caricamento:
28 dicembre 2017
MD5:
42bd12559f0eea739edf5d4adecb9510
Scaricamenti:
182
Informazioni
SECTION 1 OPERATING INSTRUCTIONS Page Introduction 1-1 Instrument Description 1-1 Initial Operation 1-1 Functions Available At Rear Connector 1-2 Operating Considerations 1-2 Output Connections 1-2 Risetime and Falltime 1-2 Impedance Matching 1-2 Basic Operation 1-4 Free-Running Output 1-4 Voltage-Controlled Frequency (VCF) Output 1-4 Custom Timing Capacitor Selection 1-5 Typical VCF Application 1-6 Electrical Characteristics 1-7 SECTION 2 THEORY OF OPERATION Introduction 2-1 Triangle Generator 2-1 Sine Shaper 2-1 Output Amplifier 2-2 Power Supplies 2-2 SECTION 3 SERVICE INFORMATION Symbols and Reference Designators 3-1 Electrical Replaceable Parts List 3-2 Front Panel Controls and Connectors Calibration Procedure Services Available Maintenance Test Equipment Parts Location Grid Rear Interface Connector Assignments Block Diagram Generator Loop Schematic Output Amplifier Schematic Power Supplies Schematic Mechanical Replaceable Parts List Exploded View Accessories and Repackaging CHANGE INFORMATION

mostra più dettagli

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image