EZ Digital OS-3060D Oscilloscopio
Digital Storage Oscilloscope
This product CS-3000DSRS is the 2 channel digital storage
which is equipped with A/D Converter
It combines the benefits of digital scope to measure, store,
interpret and communicate the rapid trace, with the benefits
of analog scope to measure the wide band width, 2 time axis
generator, delay sweep and separated TV trigger signal.
It reduces the measurement error, and' uses 6% squared type
CRT with internal flourescent scale which enables to take
the photograph of observed waveform.
(1) High speed optical frequency band width
installed on each channel samples the input
signal at the max. rate of 20MHz samples/sec. Any signal
with perfect repeatedness can be stored. (Max. 20-60 MHz)
This product can be used as an ordinary real time
with frequency range between 20 and 60MHz.
(2) Large storage capacity
Each channel has 2kW memory. Since it can indicate the
waveform composed of lkW data, it measures any rapidly
changing transition trace with high accuracy.
(3) Waveform save
It has lkW memory to save two waveforms stored in each channel.
It has a variety of following functions to interpret a wide
range of signals :
- Roll mode function to measure low signal.
- Average function to eliminate noise from the signal and to
measure the pure signal.
It uses both RS-232C Interface
function to input/output the
digital data to the personal computer, and RS-232C to
conduct screen hardcopy through digital plotter. It also
interprets and records the stored data.
(6) CRT and cursor readout
It can promptly perform the operation and measurement using
both the CRT readout function to display the set information
of panel and the cursor readout function to display the
voltage difference (AV), time difference (AT) and frequency
difference (l/AT) between two cursors.
Tipo di manuale:
12.78 Mbytes (13401800 Bytes)
ID del manuale:
01 gennaio 1995
Documento elettronico, senza ricerca, molto ben leggibile.
04 settembre 2017