Daetron MC400 Test Set
Produttore:
Nessuna immagine disponibile!
Forse puoi caricare una foto per la
Daetron MC400?
Se avete altri manuali per la
Daetron MC400 potete caricare i file qui .
Modello:
MC400
Data:
1989
Categoria:
Gruppo:
Descrizione:
Component Analyser/Capacitance Meter
Informazioni
The Daetron model MC400 is a compact hand held 4 digit LCD
Component Analyser/Capacitance Meter capable of measuring
over the full range of 0.1 pF to 1 FARAD (999.9 mF), In
completely autoranging or manual modes, this instrument
incorporates so many features that the user is well advised
to read and understand this manual thoroughly so as to avoid
any misunderstandings about how the unit works. Complex
procedures Involving certain features could lead an unwary
user to thin* the unit is not working properly.
The basic method of measuring capacitance involves the use
of charging and discharging the capacitor while counting the
time of this cycle, the cycle time is converted to display a
value which Is equivalent to the value of the capacitor
under test, the microprocessor controlling the circuitry
senses when the value of any capacitor is over ranged for
that value and switches to the next higher range resistor.
Component analysing Is carried out by scanning any component
mounted In the top 3 receptacles of the transistor socket
and monitoring the behavior of the voltage outputs that
these components produce. For operating the component
analyser at its optimum level see the section on the AC adaptor.
Tipo di manuale:
Manuale d'uso
Pagine:
47
Dimensione:
33.64 Mbytes (35276969 Bytes)
Lingua:
english
Revisione:
ID del manuale:
Data:
Qualità:
Documento scansionato, la lettura in parte male, non in parte leggibile.
Data caricamento:
2015 05 09
MD5:
bceac9c71e2b2dbf637c8b861e1bebe7
Scaricamenti:
965
Informazioni
SECTION 1 GENERAL INFORMATION
1.1 INTRODUCTION
1.2 INSTALLING THE BATTERY
1.3 PREDICTING BATTERY FAILURE.
1.4 USING THE OPTIONAL AC BATTERY ADAPTOR (DAETRON MODEL PS100)
1.5 ACCESSORIES INCLUDED
1.6 GETTING STARTED
1.7 ENTERING IN INFORMATION ON THE KEYPAD
SECTION 2 GENERAL OPERATION
2.1 MEASURING CAPACITANCE
2.2 USING THE FUNCTION HOLD KEY
2.3 ENTERING A ZERO VALUE FROM THE KEYPAD
2.4 MANUAL RANGE OPERATION
2.5 MEASURING LEAKAGE
2.6 SORTING CAPACITORS