Tektronix 7D20 Oscilloscopio
Produttore:
Modello:
7D20
Data:
1985
Categoria:
Gruppo:
Descrizione:
Programmable Digitizer Plugin

Informazioni

7D20 FEATURES The 7D20 Programmable Digitizer is designed to enhance the capabilities of 7000-series Oscilloscope mainframes. Multiple waveform storage, crt readout, two cursors for point-to-point measurements, pre- and post-trigger viewing, store and recall of up to six front-panel settings, and signal averaging to reduce noise are just a few of the features this three-wide Plug-In unit provides. Waveform storage using digital memory eliminates the need for a storage crt, and allows viewing information that occurred prior to a triggering event Six waveforms can be stored and displayed at the same time for easy comparison. A complete alphanumerical display of cursor waveform information and measurement values, time base and amplitude settings, trigger position, displayed waveform number, prompts and error messages, and a master menu that allows you to choose seldom used features easily and quickly. The master menu offers a convenient way to enable special functions such as the STORE and RECALL of front-panel settings as well as allowing you to branch-out to other menus. The test menu is designed to assist in troubleshooting the 7D20 in the event of a failure. The SELF TEST may be implemented at any time to ensure user confidence. The other selections allow service personnel to diagnose faults to the component level. Complete control of the 7D20's functions may be controlled via the IEEE-488 Interface. Commands, waveforms, and alphanumeric text messages may be sent or received via the front-panel port.

mostra più dettagli

Servizio e manuale utente
Tipo di manuale:
Servizio e manuale utente
Pagine:
394
Dimensione:
89.58 Mbytes (93931672 Bytes)
Lingua:
english
Revisione:
Revised
ID del manuale:
070-3858-01
Data:
Qualità:
Documento scansionato, tutto leggibile.
Data caricamento:
2013 04 24
MD5:
57977624debc0ec7d8727a55af2c2a98
Scaricamenti:
977