Marconi TF 2600 Multimetro analogico
Produttore:
Modello:
TF 2600
Data:
Categoria:
Gruppo:
Descrizione:
AC Voltmeter

Informazioni

INTRODUCTION The TF 2600 is a wide-range a.c. voltmeter of high sensitivity and stability; 12 ranges, giving full-scale deflections from 1 mV to 300 V, enable voltages down to the order of 100 to be measured. An amplifier-rectifier type instrument, it maintains good accuracy with moderately distorted waveforms. A cathode follower input stage, with associated attenuators, regulates the signal level to a four-valve Amplifier,, the output of which energizes a moving coil meter via a full-wave crystal rectifier. The meter is calibrated in terms of the r,m* s* value of a sinewave, but responds to the average value; it is also calibrated in decibels relative to 1 mW in 600ft, giving a range of -72 to +52 dBm. The output of the Amplifier section is made available at a pair of f ront-panel terminals. This provides a pre-amplifier facility, having a response similar to that of the instrument as a whole, with an output of up to 300 mV on any range.

mostra più dettagli

Servizio e manuale utente
Tipo di manuale:
Servizio e manuale utente
Pagine:
9
Dimensione:
349.71 Kbytes (358104 Bytes)
Lingua:
english
Revisione:
ID del manuale:
Data:
Qualità:
Documento scansionato, la lettura in parte male, non in parte leggibile.
Data caricamento:
2018 12 23
MD5:
aa9a4a7524f7327e8b863c76e9606a80
Scaricamenti:
550