Attrezzatura informazioni:

Philips Medical Systems SureSigns VS1 Sistema di monitoraggio
Produttore:
Philips Medical Systems
Modello: SureSigns VS1
Data: 2004
Categoria: Attrezzature mediche e biomediche
Gruppo: Sistema di monitoraggio
Descrizione: Monitor
Informazioni:
                                    The VS1 monitor is a portable vital signs monitor. It can be
used to non-invasively and automatically measure systolic,
mean and diastolic blood pressures, pulse rate, oxygen
saturation (SpO2) and temperature.
You can measure all of these vital signs if you purchased a
fully configured model; other models contain a subset of
these features.

Large, colored LEDs display the current parameters. To
increase readability, each parameter has its own
unique color. A large LCD screen displays historical
information and is also used to configure the system.

The monitor uses dynamic linear deflation blood pressure
technology and features a full array of alarm settings for
each displayed parameter. It can hold up to 400 lines of
data that can be viewed or printed in several formats.

The monitor can operate on AC power or on a 6-volt internal
battery.

Questi manuali sono disponibili per l'attrezzatura di cui sopra:

Tipo manuale: Manuale d'uso PhilipsMedical-10654-Manual-Page-1-Picture
Pagine: 364
Dimensioni: 3.57 Mbytes (3744382 Bytes)
Lingua: Inglese
Revisione: 3
Manual-ID/Number: 9898 031 36541
Data: 01 novembre 2004
Qualità: Documento elettronico, senza ricerca, molto ben leggibile.
Data di caricamento:
MD5: 7c9fba30a9991531e75a9340e6515561
Download: 48 dal 31 marzo 2018
Informazioni:
1. Overview  ... .
 ... .
. 1-1
Introduction  ... .
 ... .
 ... .1-1
Intended Use  ... .
 ... .
 ... .1-2
About this Book  ... .
 ... .
 ... .1-2
VS1 Configurations  ... .
 ... .
 ... .1-2
2. Setting Up the Monitor ... .
 ... 2-1
Checking the Shipment  ... .
 ... .
 ... .2-1
Setting Up the Monitor  ... .
 ... .
 ... .2-1
Powering Up and Down  ... .
 ... .
 ... .2-3
Sleep Mode  ... .
 ... .
 ... .2-3
Recharging the Battery ... .
 ... .
 ... .2-3
Disposing of the Monitor  ... .
 ... .
 ... .2-4
3. Operating Your Monitor  ... .
 ... 3-1
Using the Monitor Safely  ... .
 ... .
 ... .3-1
LCD Screen Displays ... .
 ... .
 ... .3-2
Line List Display  ... .
 ... .
 ... .3-2
Soft Keys ... .
 ... .
 ... .3-3
Saving Data  ... .
 ... .
 ... .3-3
Changing the Save Rate  ... .
 ... .3-3
Clearing Data from Memory  ... .
 ... .
 ... .3-4
Changing the System Date and Time ... .
 ... .
. . .3-4
4. Entering Patient ID Information ... .
 ... 4-1
Using the Bar Code Scanner to Enter Patient IDs  ... .
 ... .4-1
Entering Patient IDs Manually ... .
 ... .
 ... .4-2
Adding Measurements to an Existing Patient Record  ... .
 ... .4-2
5. Monitoring Blood Pressure  ... .
 ... 5-1
Blood Pressure Controls ... .
 ... .
 ... .5-1
NIBP Safety Information  ... .
 ... .
 ... .5-2
Connecting the NIBP Cuff and Hose  ... .
 ... .5-2
Smart Inflation Feature  ... .
 ... .
 ... .5-2
Specifying Cuff Settings  ... .
 ... .
 ... .5-3
Selecting a Measurement Mode  ... .
 ... .5-3
Specifying an Initial Inflation Value  ... .
 ... .
. .5-4
Enabling the BP Alarm Option  ... .
 ... .
. .5-4
Enabling Smart Clock for Interval NIBP Readings  ... .
 ... .5-4
Placing the Cuff  ... .
 ... .
 ... .5-4
Initiating a Single NIBP Measurement  ... .
 ... .
. . .5-5
Continuous NIBP Monitoring  ... .
 ... .
 ... .5-5
Selecting a Cuff Interval  ... .
 ... .
 ... .5-5
Selecting a Cuff Interval Program  ... .
 ... .
. .5-6
Stopping Interval Measurements  ... .
 ... .5-8
6. Monitoring Temperature  ... .
 ... 6-1
Temperature Controls  ... .
 ... .
 ... .6-1
Temperature Safety Information  ... .
 ... .
 ... .6-2
Setting the Measurement Mode  ... .
 ... .
 ... .6-2
Temperature Mode LED  ... .
 ... .
. . .6-2
Selecting a Probe  ... .
 ... .
 ... .6-3
Taking a Single Temperature Measurement  ... .
 ... .6-3
Measuring Temperature Continuously ... .
 ... .
. . .6-4
7. Monitoring SpO2 and Pulse Rate  ... .
 ... 7-1
SpO2 and Pulse Controls  ... .
 ... .
 ... .7-1
SpO2 Safety Information  ... .
 ... .
 ... .7-2
Selecting a Sensor  ... .
 ... .
 ... .7-3
Placing the Reusable Sensor  ... .
 ... .
 ... .7-3
Placing the Disposable Sensor  ... .
 ... .
 ... .7-4
8. Setting Alarms ... .
 ... 8-1
Alarm Controls ... .
 ... .
 ... .8-1
Changing Alarm Limits  ... .
 ... .
 ... .8-2
Setting Patient-Specific Alarm Limits  ... .
 ... .
 ... .8-3
Changing Audible Alarm Settings  ... .
 ... .
 ... .8-3
Adjusting the Volume  ... .
 ... .
 ... .8-4
Silencing the Alarm  ... .
 ... .
 ... .8-4
9. Recording and Printing Results ... .
 ... 9-1
Loading the Paper  ... .
 ... .
 ... .9-1
Printing Automatically  ... .
 ... .
 ... .9-1
Printing Only When an Alarm Occurs  ... .
 ... .
. . .9-2
Selecting Additional Print Options  ... .
 ... .
 ... .9-2
Printing Vital Signs for the Current Patient  ... .
 ... .9-3
Printing Vital Signs by Patient ID  ... .
 ... .
. .9-3
Printing All Currently Displayed Records  ... .
 ... .9-3
Printing All Records in Memory  ... .
 ... .9-3
Print Formats  ... .
 ... .
 ... .9-3
Vital Signs Print Format  ... .
 ... .
 ... .9-4
Line List Print Format ... .
 ... .
 ... .9-4
10. Troubleshooting and Maintenance  ... .
 ... 10-1
Problems with the Monitor  ... .
 ... .
 ... .10-1
Recorder Problems  ... .
 ... .
 ... .10-2
NIBP Problems  ... .
 ... .
 ... .10-3
Temperature Problems  ... .
 ... .
 ... .10-4
SpO2 Problems ... .
 ... .
 ... .10-5
Bar Code Scanner Problems  ... .
 ... .
 ... .10-6
Error and Informational Messages ... .
 ... .10-6
Battery Care and Replacement ... .
 ... .
 ... .10-7
Internal Fuse Replacement ... .
 ... .
 ... .10-8
Cleaning the Monitor  ... .
 ... .
 ... .10-8
Accidental Wetting of the Monitor  ... .
 ... .
.10-8
Cleaning the Accessories  ... .
 ... .
 ... .10-8
11. Specifications  ... .
 ... 11-1
Monitor Specifications  ... .
 ... .
 ... .11-1
Recorder Specifications  ... .
 ... .
 ... .11-1
Environmental Specifications  ... .
 ... .
 ... .11-1
NIBP Specifications ... .
 ... .
 ... .11-2
SpO2 Sensor Specifications  ... .
 ... .
 ... .11-2
Temperature Specifications  ... .
 ... .
 ... .11-2
Barcode Reader Specifications  ... .
 ... .
 ... .11-3
12. Accessory List  ... .
 ... 12-1
Standard Accessories  ... .
 ... .
 ... .12-1
Optional Accessories  ... .
 ... .
 ... .12-1
A. Electromagnetic Compatibility ... .
 ... A-1
Reducing Electromagnetic Interference  ... .
 ... A-1
Restrictions for Use  ... .
 ... .
 ... A-2
Emissions and Immunity  ... .
 ... .
. . A-2
Guidance and Manufacturer’s Declaration  ... .
 ... A-2
Recommended Separation Distances  ... .
 ... A-5
PhilipsMedical-10654-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics