Mirage Communication Equipment B1018G Amplificatore
Produttore:
Nessuna immagine disponibile!
Forse puoi caricare una foto per la
Mirage Communication Equipment B1018G?
Se avete altri manuali per la
Mirage Communication Equipment B1018G potete caricare i file qui .
Modello:
B1018G
Data:
Categoria:
Gruppo:
Descrizione:
VHF RF Power Amplifier
Informazioni
This compact, rugged, VHF RF power Amplifier greatly
improves signal-quality and
range. This unit contains a low-noise GAsFET receiving
amplifier, a 160-watt power
amplifier, and associated control and protection circuitry.
This Amplifier operates from any well-filtered
direct-current 11-15 volt power source
capable of supplying 30 amperes under full-load. The power
source must be either
negative grounded or totally ground independent.
This Amplifier has the following important features:
1.) Automatic RF actuated transmit and receive switching or
manual switching
2.) Active bias for greatly improved SSB linearity
3.) Low-noise GAsFET receive preamplifier
4.) True push-pull circuitry and clean RF layout for
excellent stability
5.) Excess SWR and overdrive protection
6.) Remote control capabilities
Tipo di manuale:
Servizio e manuale utente
Pagine:
16
Dimensione:
132.31 Kbytes (135486 Bytes)
Lingua:
english
Revisione:
ID del manuale:
Data:
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2017 08 19
MD5:
a68f640177c4f6e2d7e8ca480ee99423
Scaricamenti:
385
Informazioni
Quick Connect
Important: Read this section first!
Mounting Considerations
1.1
Cooling and Temperature
1.2
Power Wiring
1.3
RF and Controls Cables
1.4
Mobile Mounting Conderations
1.5
Home or Fixed Installations
1.6
Repeater Mounting
Radio or Exciter
2.1
Drive Level
2.2
Duty Cycle
2.3
T/R Control or “Keying”
2.4
Wiring
FM, CW and Non-Linear Modes
3.1
Drive Power
3.2
Duty Cycle CW and FM
3.3
Feedlines and Antennas
SSB and Linear modes
4.1
Splatter and Distortion
4.2
Drive Power
4.3
Duty Cycle
4.4
T/R Control or Switching
4.5
Power Output
4.6
Antennas and Feedlines
Receiving Preamplifier (Pre-Amp)
5.1
Signal-to-noise Ration
5.2
Intermodulation (IMD) Products
In Case of Difficulties
6.1
Does Not Transmit or Receive at All
6.2
Nothing Lights or Seems to Work
6.3
Transmit OK, Does Not Amplify Receive
6.4
Receives OK, Does Not Amplify Transmit
6.5
Continuously Trips Fault Light
6.6
Relay Chatters or Clicks Off and On
6.7
Technical Assistance
6.8
Ordering Parts
Notes
Schematic