Thurlby Thandar Instruments TTI TG550 Generatore
Produttore:
Modello:
TG550
Data:
Categoria:
Gruppo:
Descrizione:
Precision 5MHz Function Generator

Informazioni

The TG550 is a precision 5MHz function Generator with waveforms of sine, triangle, ramp. pulse and DC from a variable amplitude 50Ω or 600Ω output. A TTL/CMOS auxiliary output is also provided. The frequency range is 0·005Hz to 5MHz selected by a seven decade range multiplier and calibrated vernier. Both the frequency vernier and the sweep input can give 1000:1 frequency change within a selected range. Frequency can be locked to a crystal reference to give superior frequency stability. A 10:1 symmetry range permits ramp and pulse waveforms to be produced. The Generator output level is 20Vpk-pk maximum from a 50/600Ω source. The level is set via a switched attenuator plus vernier with a total range of >80dB. DC offset is vernier adjustable over a ±10V range with centre detent for 0V. Waveform quality is good at all frequencies and signal levels. The TG550 also has internal LIN/LOG sweep with sweep output. Amplitude modulation of up to 100% is possible using the internal 400Hz Oscillator or an external source. The large liquid crystal display shows frequency and amplitude simultaneously. Good resolution and a fast display update rate are maintained at all frequencies. The display can also be used as an external 20MHz frequency meter with up to 7-digit resolution. Additional display annunciators indicate Generator status when sweep, AM, etc. are in use.

mostra più dettagli

Manuale d'uso
Tipo di manuale:
Manuale d'uso
Pagine:
43
Dimensione:
264.46 Kbytes (270811 Bytes)
Lingua:
english
Revisione:
Issue 7
ID del manuale:
48591-0560
Data:
Qualità:
Documento scansionato, tutto leggibile.
Data caricamento:
2017 01 14
MD5:
81d320b79be3157174a25d17b8d34ef5
Scaricamenti:
629

Informazioni

Introduction 2 Specification 3 EMC 7 Safety 8 Installation 9 Operation 10 Calibration and Maintenance 13 Instructions en Francais Sécurité 14 Installation 15 Fonctionnement 16 Calibrage et maintenance 20 Bedienungsanleitung auf Deutsch Sicherheit 21 Installation 22 Betrieb 23 Kalibrierung und Wartung 27 Istruzioni in Italiano Sicurezza 28 Installazione 29 Funzionamento 30 Calibrazione e Manutenzione 34 Instrucciones en Español Seguridad 35 Instalación 36 Funcionamiento 37 Calibrado y Mantenimiento 41

mostra più dettagli