Attrezzatura informazioni:

Ametek Advanced Measurement Technology 5113 Amplificatore
Produttore:
Ametek Advanced Measurement Technology
Modello: 5113
Data: 2002
Categoria: Strumenti di misura
Gruppo: Amplificatore
Descrizione: Low Noise Preamplifier
Informazioni:
                                    The Model 5113 Low-Noise Preamplifier provides high gain,
low-noise amplification of wideband signals from DC to 1
MHz, well suited for use with both SIGNAL RECOVERY and other
manufacturers’ signal processing instruments. Adjustable
high and low frequency rolloffs allow the bandwidth to be
reduced. Two inputs, with switchable coupling, allow either
differential or single-ended operation. Coarse gain is
selectable from x5 to x50,000 in a 1-2-5 sequence with a
fine gain control extending the range to xl to X 10,000. An
uncalibrated vernier allows finer adjustment of the gain.

The unit may be powered either from an external DC power
supply or from its internal sealed and maintenance-free
lead-acid batteries. These batteries recharge automatically
when a suitable external Power supply is connected. Other
features include an overload fast-recovery button, a
front-panel DC zero screwdriver control, and a battery test
facility.

Questi manuali sono disponibili per l'attrezzatura di cui sopra:

Tipo manuale: Manuale d'uso Ametek-8000-Manual-Page-1-Picture
Pagine: 39
Dimensioni: 287.92 Kbytes (294830 Bytes)
Lingua: Inglese
Revisione:
Manual-ID/Number: 222144
Data: 01 gennaio 2002
Qualità: Documento elettronico, senza ricerca, molto ben leggibile.
Data di caricamento:
MD5: 8fc2006b0be9beda788767712993bef7
Download: 152 dal 03 settembre 2016
Informazioni:
Chapter One, Introduction

1.1	Model 5113
Preamplifier ... 1-1

1.2	Why use a
Preamplifier? ... 1-1

Chapter Two, Installation & Initial Checks

2.1
Installation ... 2-1

2.1.01
Introduction ... 2-1

2.1.02
Inspection ... 2-1

2.2	Initial
Checks ... 2-1

2.2.01
Introduction ... 2-1

2.2.02	Equipment
Required ... 2-1

2.2.03
Procedure ... 2-2

Chapter Three, Front and Rear Panels

3.1	Front
Panel ... 3-1

3.1.01	INPUT
Connectors ... 3-1

3.1.01	INPUT COUPLING
Button ... 3-1

3.1.03	RECOVER/Sleep
Button ... 3-2

3.1.04	GAIN (VERNIER)
Control ... 3-2

3.1.05	LF ROLL-OFF (SLOPE)
Control ... 3-3

3.1.06	HF ROLL-OFF (SLOPE)
Control ... 3-3

3.1.06	POWER
Switch ... 3-4

3.1.07	OUTPUT
Connector ... 3-4

3.2	Rear
Panel ... 3-4

Chapter Four, Front Panel Operation

4.1
Introduction ... 4-1

4.2
Operation ... 4-1

4.2.01
Power ... 4-1

4.2.02	Signal
Grounding ... 4-1

4.2.03	Signal Voltage and
Gain ... 4-1

4.2.04	DC Zero
Adjustment ... 4-2

4.2.05	Overload Fast
Recovery ... 4-2

4.2.06	Input Mode
Selection ... 4-2

4.2.07	Filter
Selection ... 4-2

4.2.08	Filter
Roll-Off ... 4-3

4.2.09	Special
Pages ... 4-3

4.2.10	Battery Operation, Test and
Charging ... 4-4
Chapter Five, Computer Operation

5.1
Introduction ... 5-1

5.2
Operation ... 5-1

5.2.01
Overview ... 5-1

5.2.02	RS232 Interface - General
Features ... 5-1

5.2.03	Choice of Baud
Rate ... 5-2

5.2.04	RS232 Interface - Command
Format ... 5-2

5.2	Command
Descriptions ... 5-3

Appendix A, Specifications Appendix B, Pinouts Appendix c,
Power supply Index

Warranty
 ... End of
Manual

Ametek-8000-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics