Tektronix TDS 694C Oscilloscopio
Produttore:
Nessuna immagine disponibile!
Forse puoi caricare una foto per la
Tektronix TDS 694C?
Se avete altri manuali per la
Tektronix TDS 694C potete caricare i file qui .
Modello:
TDS 694C
Data:
1999
Categoria:
Gruppo:
Descrizione:
Digital Storage Oscilloscope
Informazioni
Whether you are working on next generation
microprocessor designs, high-speed data
communications equipment or in high-energy
physics research, the TDS694C captures
your fastest signals with the best fidelity and
resolution available. Its 3 GHz bandwidth
preserves your waveform’s fast rising edges
and accurately shows signal details. With
10 GS/s digitizing rate simultaneously on all
four channels and a high-stability timebase,
the TDS694C makes your critical timing
measurements with the highest resolution
and accuracy – even channel-to-channel
measurements made in a single acquisition.
The TDS600C oscilloscopes incorporate all
the advanced trigger features you expect in
a high performance oscilloscope: triggering
on Glitches, Slew Rate violations, Setup-and-
hold Time violations, Timeouts, Logic Patterns
and States on four channels. For applications
where sophisticated multi-channel debugging
is required, the TDS694C can be configured
for cross triggering with a Tektronix TLA700
Logic Analyzer.
The TDS600C oscilloscopes give you the total
solution to your digital design characterization
and debugging needs. Now you have the tool
you need to verify design margins, characterize
setup-and-hold times and measure clock-
to-data skew on the fastest digital designs.
The TDS694C’s companion Probe, the P6249,
offers small size to reliably contact your high-
density boards with their fine-pitch, hard to
reach components. The P6249 has short
ground connection to give the maximum
system bandwidth and preserve the details
of your signals.
The TDS600C offers 29 automatic measurements, with
measurement statistics, to make
your design verification and characterization
job much faster and easier. Available Java-
based application packages for jitter analysis,
disk drive measurements and processor
specification measurements provide customized measurements
and analysis capability.
The TDS600C gives you the performance and
features you need to get your job done faster
and more thoroughly.
Tipo di manuale:
Manuale di servizio
Pagine:
330
Dimensione:
4.28 Mbytes (4491816 Bytes)
Lingua:
english
Revisione:
ID del manuale:
071-0627-02
Data:
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2017 12 25
MD5:
800d42e6f00f29ebddae10b84749d59c
Scaricamenti:
7916
Informazioni
This manual is divided into sections, such as Specifications
and Theory of
Operation. Further, it is divided into subsections, such as
Product Description
and Removal and Installation Procedures.
Sections containing procedures also contain introductions to
those procedures. Be
sure to read these introductions because they provide
information needed to do
the service correctly and efficiently. The following is a
brief description of each
manual section.
H
Specifications contains a product description of the TDS
500D, TDS 600C
TDS 700D and TDS 714L Oscilloscopes and tables of the
characteristics and
descriptions that apply to it.
H
Operating Information includes general information and
operating instruc-
tions at the level needed to safely power on and service
this Oscilloscope. A
statement of the service strategy that this manual supports,
and instructions
for shipment of the oscilloscopes are found in this section.
H
Theory of Operation contains circuit descriptions that
support general service
and fault isolation.
H
Performance Verification contains a collection of
procedures for confirming
that these oscilloscopes function properly and meet
warranted limits.
H
Adjustment Procedures contains a collection of procedures
for adjusting
these oscilloscopes to meet warranted limits.
Maintenance contains information and procedures for doing
preventive and
corrective maintenance of these oscilloscopes. Instructions
for cleaning, for
module removal and installation, and for fault isolation to
a module are
found here.
Options contains information on servicing any of the
factory-installed
options that may be present in your Oscilloscope.
Electrical Parts List contains a statement referring you to
Mechanical
Replaceable Parts, where both electrical and mechanical
modules are listed.
Diagrams contains a block diagram and an interconnection
diagram useful
for isolating failed modules.
Mechanical Parts List includes a table of all replaceable
modules, their
descriptions, and their Tektronix part numbers.
Tipo di manuale:
Scheda tecnica
Pagine:
4
Dimensione:
825.54 Kbytes (845349 Bytes)
Lingua:
english
Revisione:
ID del manuale:
55W-10066-7
Data:
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2014 11 23
MD5:
befa4fc33c0faaded30ea05b9bd2cec5
Scaricamenti:
2404
Tipo di manuale:
Manuale d'uso
Pagine:
301
Dimensione:
2.17 Mbytes (2280421 Bytes)
Lingua:
english
Revisione:
ID del manuale:
071-0473-00
Data:
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2019 09 22
MD5:
ed7457bfed92cfb702d8609ce065ce38
Scaricamenti:
418
Informazioni
This document supports firmware version 1.0 and above.
This is the User Manual for the TDS 694C Oscilloscopes
The chapter Getting Started briefly describes the TDS 694C Oscilloscopes,
prepares you to install it, and tells you how to put it into service.
The chapter Operating Basics covers basic principles of the operation of the
oscilloscope. The operating Interface illustrations and the tutorial examples
rapidly help you understand how your Oscilloscope operates.
The chapter Reference teaches you how to perform specific tasks. See page 3–1 for a complete list of operating tasks covered in that chapter.
The Appendices provide an options listing, an Accessories listing, and other
useful information.