Anritsu MH680B Generatore
Produttore:
Modello:
MH680B
Data:
1985
Categoria:
Gruppo:
Descrizione:
Tracking Generator

Informazioni

The MH680B Tracking Generator is used in conjunction with the MS61 OB Spectrum Analyzer as a wideband sweep signal Generator which measures amplitude vs. frequency response by direct observation. The output frequency of the MH680B when used with the MS610B can be set in the range from 100 kHz to 2 GHz by using the MS61OB frequency dial. The output level of the MH680B can be varied continuously in the range from -10 to 0 dBm. The MH680B with the MS610B can be used to measure the frequency response of filters, amplifiers, and attenuators. The device under measurement can be adjusted while directly observing the characteristics on the MS610B CRT display. Also the MH680B with the MS610B and a frequency Counter, can be used to measure the accurate frequency and frequency response. Impedance can be measured by direct observation using a directional coupler or a reflection bridge.

mostra più dettagli

Servizio e manuale utente
Tipo di manuale:
Servizio e manuale utente
Pagine:
74
Dimensione:
1.28 Mbytes (1339609 Bytes)
Lingua:
english
Revisione:
ID del manuale:
Data:
Qualità:
Documento scansionato, tutto leggibile.
Data caricamento:
2014 05 02
MD5:
db6e193c7581c4b5701f893c381d513a
Scaricamenti:
1005

Informazioni

SECTION 1 GENERAL ... 1-1 SECTION 2 COMPONENTS AND SPECIFICATIONS ... 2-1 2.1 Components ... 2-1 2.2 Specifications ... 2-1 SECTION 3 OPERATION . ... 3-1 3.1 Precautions ... 3-1 3.1.1 Power supply ... 3-1 3.1.2 Environmental conditions of installation site ... 3-2 3.1.3 Maximum input level ... 3-2 3.2 Explanation of Controls ... 3-3 3.3 Measurement ... 3-5 3.3.1 Measurement Preparations ... 3-5 3.3.2 Measurement Precautions ... 3-8 3.3.3 Measurement ... 3-10 (1) Amplifier measurement ... 3-10 (2) Measurement with improved frequency accuracy ... 3-11 (3) Filter measurement ... 3-16 (4) Impedance measurement ... 3-19 SECTION 4 PRINCIPLES OF OPERATION ... • 4-1 SECTION 5 PERFORMANCE TEST 5.1 Introduction ... 5-1 5.2 Equipment Required for Performance Test ... 5-2 5.3 Preliminary Operations ... 5-2 5.4 Performance Test ... 5-2 5.4.1 Frequency range ... 5-3 5.4.2 Output level range ... 5-4 5.4.3 Output level flatness ... 5-5 5.4.4 ower consumption ... 5-6 SECTION 6 CIRCUIT DIAGRAM ... 6-1 SECTION 7 REPLACEABLE PARTS 7.1 Introduction ... 7-1 7.2 Ordering Information ... 7-1 7.3 Reading Capacitance/Resistance ... 7-4 7.4 Semiconductor Markings ... 7-6 7.5 Parts List ... 7-7

mostra più dettagli