Tektronix FG 503 Générateur
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Tektronix FG 503 you can upload the files here .
Model:
FG 503
Date:
1974
Category:
Group:
Description:
Function Generator
Information
The FG 503 Function Generator is designed to operate in a TM
500 series power module. Low distortion sine, square and
triangle waveforms from 1 Hz to 3 MHz, are available at the
front panel. A +2.5 V square wave trigger also is available
at the front panel. Variable dc offset of =5 V is provided.
A custom timing switch position is provided. This allows the
user to install a timing capacitor for custom tailoring the
frequency range of the FG 503,
A voltage-controlled frequency (VCF) input controls the
output frequency from an external Voltage Source. The output
frequency can be swept above or below the selected
frequency, to a maximum of 1000:1, depending on the polarity
and amplitude of the VCF input and the selected output
frequency.
The variety of swept and modulated signals available from
the FG 503 make it especially useful for such applications
as testing servo-system or Amplifier response, distortion
and stability. It is also useful for FM generation or as a
variable beat-frequency Oscillator. The square wave trigger
output can be used as a source for TTL logic, or to
synchronize an external device such as an Oscilloscope or
counter.
Manual type:
Service et Manuel de l'utilisateur
Pages:
41
Size:
2.57 Mbytes (2695490 Bytes)
Language:
english
Revision:
First Edition
Manual-ID:
070-1727-00
Date:
1974 04 01
Quality:
Document scanné, tous les lisible.
Upload date:
2017 12 28
MD5:
42bd12559f0eea739edf5d4adecb9510
Downloads:
695
Information
SECTION 1 OPERATING INSTRUCTIONS Page
Introduction 1-1
Instrument Description 1-1
Initial Operation 1-1
Functions Available At Rear Connector 1-2
Operating Considerations 1-2
Output Connections 1-2
Risetime and Falltime 1-2
Impedance Matching 1-2
Basic Operation 1-4
Free-Running Output 1-4 Voltage-Controlled Frequency
(VCF) Output 1-4
Custom Timing Capacitor Selection 1-5
Typical VCF Application 1-6
Electrical Characteristics 1-7
SECTION 2 THEORY OF OPERATION
Introduction 2-1
Triangle Generator 2-1
Sine Shaper 2-1
Output Amplifier 2-2
Power Supplies 2-2
SECTION 3 SERVICE INFORMATION
Symbols and Reference Designators 3-1
Electrical Replaceable Parts List 3-2
Front Panel Controls and Connectors Calibration Procedure
Services Available Maintenance Test Equipment Parts Location
Grid Rear Interface Connector Assignments Block Diagram
Generator Loop Schematic Output Amplifier Schematic Power
Supplies Schematic Mechanical Replaceable Parts List
Exploded View
Accessories and Repackaging CHANGE INFORMATION
