Rigol Technologies Inc. DG2041A Générateur
Fabricant:
Modèle:
DG2041A
Date:
2008
Catégorie:
Groupe:
Description:
Function/Arbitrary Waveform Generator

Information

RIGOL DG2000 Series Function/ Arbitrary Waveform Generator adopt the direct digital Synthesizer (DDS) technology, which can provide stable, high-precision, pure and low distortion sine signal. It can also provide 40MHz square waveform with fast rising and falling edges. Its combination of excellent system features, easiness in usage and versatile functions makes this Generator a perfect solution for your job now and in the future. DG2000 Series Function/ Arbitrary Waveform Generator have clear and simple Front-Panel. The user-friendly panel layout and instructions, versatile terminals, direct graph Interface, built-in instructions and help system have greatly simplified the operation process. Thus, users do not have to spend a great deal of time learning and familiarizing the operation of the Generator before they can use it proficiently. The built-in AM, FM, PM, PWM and FSK modulating functions generate modulated waveform at ease, without the help of a separate modulating source. The USB I/O, LAN and GPIB are the standard configuration. Remote instructions meet the SCPI specification requirements. From the characteristics and specifications given below, you will understand how DG2000 can satisfy your measurement requirements. z z z z z 16+2 channels digital output module (optional) together with the analogue channel can rebuild the most commonly used mixed signal in daily practice. DDS technology provides precise, stable and low distortion output signal. 10 standard waveforms: Sine, Square, Ramp, Pulse, Noise, Sinc, Exponential Rise, Exponential Fall, Cardiac and DC. 100MSa/s sampling rate, enable to edit arbitrary waveform with 14-bit, 512K points. Frequency characteristics: Sine/ Square: 1μHz to 40 MHz Ramp: 1μHz to 400 kHz Pulse: 500μHz to 16MHz White Noise: 20MHz bandwidth (-3dB) Arbitrary waveform: 1μHz to 12MHz Amplitude range: 2mVpp to 10Vpp (50 Ω) 40mVpp to 20Vpp (High Z) Abundant modulation function, various modulated waveform: AM, FM, PM, PWM and FSK. Linear, logarithm Sweep and Burst mode. Abundant I/O: External Modulation Source, External 10 MHz Reference Input, External trigger source, waveform output, synchronous digital signal output, Internal 10 MHz Reference output. Support USB storage device; store and read waveform configure parameters or the edited arbitrary waveform with USB devices. System Updating could also be performed by using USB devices. Remote control is realized by using the LAN. Standard interface: USB Host & Device, RS-232, GPIB. Graph Interface which shows the signal setting directly. Chinese/English user Interface. Embedded Chinese/English Help System. Support Chinese/English Input.

plus

Manuel de l'utilisateur
Type manuel:
Manuel de l'utilisateur
Pages:
161
Taille:
887.64 Kbytes (908947 Bytes)
Langue:
english
Révision:
Manuel-ID:
UGB02101-1110
Date:
2008 10 01
Qualité:
Électronique de documents, numérisation sans, bien lisible.
Date de transfert:
2017 05 13
MD5:
a2999053dffb012e8ce4bfd9a768abb3
Téléchargements:
888

Information

Safety Notices ... II The Introduction of DG2000 Series ... V Chapter 1 Getting Started ... 1-1 General Inspection ... 1-2 Handle Adjustment ... 1-3 The Front/Rear Panel ... 1-4 The DG2000 User Interface ... 1-7 To Set a Waveform ... 1-8 To Set Modulate/ Sweep/Burst ... 1-11 To Set Trigger/Output ... 1-13 To Use Digital Input ... 1-14 To Use Store/Utility/Help Function ... 1-15 Chapter 2 Operating Your Generator ... 2-1 The Menu/Graph Mode ... 2-2 To Set Sine Signals ... 2-3 To Set Square Signals ... 2-7 To Set Ramp Signals ... 2-10 To Set Pulse Signals ... 2-12 To Set Noise Signals ... 2-16 To Set Arbitrary Signals ... 2-17 To Generate the Modulated Waveform ... 2-30 To Generate Sweep ... 2-42 To Generate Burst ... 2-45 To Store and Recall ... 2-49 To Set the Utility Function ... 2-58 How to Use the Built-in Help System ... 2-81 Chapter 3 Application & Examples ... 3-1 Example 1: To Generate a Sine Wave ... 3-1 Example 2: To generate a Square Wave ... 3-2 Example 3: To generate a Ramp Wave ... 3-3 Example 4: To generate a Pulse Wave ... 3-4 Example 5: To Generate a Noise Wave ... 3-6 Example 6: To generate Arbitrary Waveform ... 3-7 Example 7: To Create an Arbitrary Waveform ... 3-8 Example 8: To Generate an AM Waveform ... 3-10 Example 9: To Generate an FSK Waveform ... 3-12 Example 10: To generate a PWM Waveform ... 3-14 Example 11: To generate a Linear Sweep ... 3-16 Example 12: To generate a Burst Waveform ... 3-18 Chapter 4 Prompt messages & troubleshooting ... 4-1 Prompting Messages ... 4-1 Troubleshooting ... 4-17 Chapter 5 Specifications ... 5-1 Specifications ... 5-2 General Specifications ... 5-7 Chapter 6 Appendix ... 6-1 Appendix A DG2000 Series Accessories ... 6-1 Appendix B Warranty ... 6-2 Appendix C General Care and Cleaning ... 6-3 Appendix D Contact RIGOL ... 6-4 Index ... I

plus