Kenwood CS-1012 Oscilloscopes
Fabricant:
Modèle:
CS-1012
Date:
1991
Catégorie:
Groupe:
Description:
Dual Trace Oscilloscope

Information

Vertical axis has high sensitivity and wide bandwidth and especially covers fully specified frequency response at 2mV/div for all models. CS-1022, 1021 ; Dual Trace 1 mV/div : DC to 10 MHz, -3 dB 2mV/div : DC to 20 MHz, -3 dB CS-1012 ; Dual Trace 1 mV/div : DC to 7 MHz, -3 dB 2mV/div : DC to 10 MHz, -3 dB CS-1020 ; Single Trace 1 mV/div : DC to 10 MHz, -3 dB 2mV/div : DC to 20 MHz, -3 dB CS-1010 ; Single Trace 1 mV/div : DC to 7 MHz, -3 dB 2mV/div : DC to 10 MHz, -3 dB • Vertical sensitivity range is selectable from 1 mV/div to 5V/div with rotary switch continuously. • Time base permits the high sweep speed. CS-1022, 1020; 20nsec/div (x10 MAG) CS-1021, 1012, 1010; 50nsec/div (x10 MAG) • Vertical sensitivity error and sweep rate error are ±3% and accurate measurements are provided. • The 150 mm rectangular CRT with internal graticule provides high brightness and accurate measurements, free of parallax error. CS-1022, 1020; domed mesh type CRT with post deflection acceleration and high brightness phosphors (acceleration voltage; 6 kV). CS-1021, 1012, 1010; high brightness CRT (acceleration voltage; 2 kV). • For convenience in making rise time measurements, the 0%, 10%, 90% and 100% levels are marked on the graticule scale of the CRT. • Trace rotation is electrically adjustable from the front panel. • By SCALE ILLUM control, the waveform is easy observed in the dark and the photograph of the waveform is easy provided. (Except(CS-1021) • Selectable AUTO FREE RUN function provides sweep without trigger input signal. • The FRAME-LINE switch provides selection of sync pulse for sweep triggering from small amplitude to large amplitude without adjusting when viewing composite video waveforms. • For CS-1022 1021 and 1012, vertical mode automatically provides the trigger signal with TRIG SOURCE and V. MODE switches. • X-Y operation is easy provided by one-touche. CS-1022, 1021, 1012; CH1 Y axis, CH2 X axis CS-1020 1010; VERT INPUT Y axis EXT TRIG INPUT X axis • CS-1022 and 1012 are provided with CH1 OUTPUT terminal to monitor input signal of CH1. • CS-1020 and 1010 are provided with VERT OUTPUT terminal to monitor input signal of VERT INPUT.

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages:
87
Taille:
11.90 Mbytes (12476526 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2020 12 28
MD5:
1103c56c96103dcdcd3c9fafffac145b
Téléchargements:
1768

Information

SPECIFICATIONS ... 2 SAFETY ... 6 CIRCUIT DESCRIPTION ... 7, 9 BLOCK DIAGRAM ... 8, 10 ADJUSTMENT ... 11 TROUBLESHOOTING ... 15 PARTS LIST ... 17 SEMICONDUCTORS ... 38 DISASSEMBLY ... 39 P.C. BOARD ... 40 SCHEMATIC DIAGRAM ... 41

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages:
55
Taille:
21.56 Mbytes (22610503 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2020 12 28
MD5:
2d1f213f140e5270bf13823c7c21bba5
Téléversé par:
Guidopianino
Téléchargements:
1384

Information

SPECIFICATIONS ... 2 SAFETY ... 6 CIRCUIT DESCRIPTION ... 7, 9 BLOCK DIAGRAM ... 8, 10 ADJUSTMENT ... 11 TROUBLESHOOTING ... 15 PARTS LIST ... 17 SEMICONDUCTORS ... 38 DISASSEMBLY ... 39 P.C. BOARD ... 40 SCHEMATIC DIAGRAM ... 41

plus

Manuel de l'utilisateur
Type manuel:
Manuel de l'utilisateur
Pages:
31
Taille:
5.87 Mbytes (6160360 Bytes)
Langue:
english
Révision:
Manuel-ID:
B50-7570
Date:
1991 12 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2020 05 17
MD5:
75cc6fd66c3ed817f2e8277923300051
Téléversé par:
Fabio
Téléchargements:
1810

Information

SAFETY ... FEATURES ... SPECIFICATIONS ... PREPARATION FOR USE ... CONTROLS AND INDICATORS ... FRONT PANEL ... REAR PANEL ... OPERATION ... INITIAL STARTING PROCEDURE ... (1) NORMAL SWEEP DISPLAY OPERATION ... (2) MAGNIFIED SWEEP OPERATION ... (3) X-Y OPERATION ... (4) VIDEO SIGNAL OBSERVATION ... APPLICATION ... Probe COMPENSATION ... TRACE ROTATION COMPENSATION ... DC VOLTAGE MEASUREMENTS ... MEASUREMENTS OF THE VOLTAGE BETWEEN TWO POINTS ON A WAVEFORM ... ELIMINATION OF UNDESIRED SIGNAL COMPONENTS ... TIME MEASUREMENTS ... FREQUENCY MEASUREMENTS ... PULSE WIDTH MEASUREMENTS ... PULSE RISE TIME AND FALLTIME MEASUREMENTS ... TIME DIFFERENCE MEASUREMENTS ... PHASE DIFFERENCE MEASUREMENTS ... RELATIVE MEASUREMENTS ... APPLICATION OF X-Y OPERATION ... ACCESSORIES ...

plus