Hewlett Packard 436A Indicateur de niveau
Fabricant:
Image 1 de 2
Image 2 de 2
Si vous avez d'autres photos ou manuels pour les
Hewlett Packard 436A vous pouvez télécharger les fichiers ici .
Modèle:
436A
Date:
Catégorie:
Groupe:
Description:
Information
The Power Meter is a precision digital-readout instrument
capable of automatic and manual measurement of RF and
Microwave power levels. It is designed for interconnection
with a compatible Power Sensor (refer to Table 1-1,
Specifications) to form a complete power measurement system.
The frequency and power range of the system are determined
by the particular Power Sensor selected for use. With the
Power Sensors available, the overall frequency range of the
system is 100 kHz to 18 GHz, and the overall power range is
—70 to +35 dBm.
1-16. Significant operating features of the Power Meter are
as follows:
• Digital Display: The display is a four-digit,
seven-segment LED, plus a sign when in the dBm or dB (REL)
mode. It also has under- and
Type manuel:
Service et Manuel de l'utilisateur
Pages:
101
Taille:
4.88 Mbytes (5119447 Bytes)
Langue:
english
Révision:
1
Manuel-ID:
00436-90053
Date:
1989 04 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2017 12 30
MD5:
42b8f7808caaa94613a412747aa769ff
Téléchargements:
283
Information
I GENERAL INFORMATION ... 1-1
1-1. Introduction ... 1-1
1-6. Specifications ... 1-1
1-8. Instruments Covered by Manual ... 1-1
1-14. Description ... 1-1
1-18. Options ... 1-3
1-19. Input-Output Options ... 1-3
1-22. Remote Control Options ... 1-3
1-25. Accessories Supplied ... 14
1-27. Equipment Required but not Supplied ... 1-4
1-29. Equipment Available ... 1-4
1-33. Recommended Test Equipment ... 1-4
1-35. Safety Considerations ... 1-4
II INSTALLATION ... 2-1
2-1. Introduction ... 2-1
2-3. Initial Inspection ... 2-1
2-5. Preparation for Use ... 2-1
2-6. Power Requirements ... 2-1
2-8. Line Voltage and Fuse Selection ... 2-1
2-10. Power Cable ... 2-2
2-12. Address Selection ... 2-2
2-13. Circuit Options ... 2-2
2-15. Interconnections ... 2-2
2-18. Mating Connectors ... 2-3
2-21. Operating Environment ... 2-3
2-23. Bench Operation ... 2-3
2-25. Rack Mounting ... 1 ... 2-3
2-28. Storage and Shipment ... 2-3
2-29. Environment ... 2-3
2-31. Packaging ... 2-3
III OPERATION ... 3-1
3-1. Introduction ... 3-1
3-4. Panel Features ... 3-1
3-6. Operator’s Maintenance ... 3-1
3-8. Operator’s Checks ... 3-1
3-10. Local Operating Instructions ... 3-1
3-12. Hewlett-Packard Interface Bus Remote
Operation ... 3-14
3-14. Compatibility ... 3-14
3-18. Data Messages ... 3-14
3-21. Receiving Data Messages ... 3-14
3-32. Sending Data Messages from the Power
Meter ... 3-18
3-40. Receiving the Trigger Message ... 3-23
3-42. Receiving the Clear Message ... 3-23
3-44. Receiving the Remote Message ... 3-23
3-46. Receiving the Local Message ... 3-23
3-48. Receiving the Local Lockout and
Clear Lockout Set Local Messages ... 3-23
3-50. Receiving the Pass Control Message ... 3-23
Section Page
3-52. Sending the Required Service Message — 3-23
3-54. Sending the Status Byte Message ... 3-23
3-56. Sending the Status Bit Message ... 3-23
3-58. Receiving the Abort Message ... 3-23
3-60. Test of HP-IB Operation ... 3-23
3-62. Power Measurement Accuracy ... 3-23
3-64. Sources of Error and Measurement
Uncertainty ... 3-30
3-70. Corrections for Error ... 3-30
3-75. Calculating Total Uncertainty ... 3-30
IV PERFORMANCE TESTS ... 4-1
4-1. Introduction ... 4-1
4-3. Equipment Required ... 4-1
4-5. Test Record ... 4-1
4-7. Performance Tests ... 4-1
4-10. Zero Carryover Test ... 4-2
4-11. Instrument Accuracy Test ... 4-3
4-12. Calibration Factor Test ... 4-6
4-13. Power Reference Level Test ... 4-7
V ADJUSTMENTS ... 5-1
5-1. Introduction ... 5-1
5-4. Safety Considerations ... 5-1
5-10. Equipment Required ... 5-1
5-12. Factory Selected Components ... 5-1
5-14. Adjustment Locations ... 5-1
5-16. DC Offset Adjustment ... 5-3
5-17. Auto Zero Offset Adjustment ... 5-3
5-18. Spike Balance Adjustment ... 5-4
5-19. Multivibrator Adjustment ... 5-6
5-20. A-D Converter and Linear Meter
Adjustment ... 5-7
5-21. Power Reference Oscillator Frequency
Adjustment ... 5-8
5-22. Power Reference Oscillator Level
Adjustment ... 5-10
5-23. Power Supply Adjustments ... 5-13
VI REPLACEABLE PARTS ... 6-1
6-1. Introduction ... 6-1
6-3. Abbreviations ... 6-1
6-5. Replaceable Parts List ... 6-1
6-7. Ordering Information ... 6-1
6-10. Parts Provisioning ... 6-1
6-12. Direct Mail Order System ... 6-1
VII MANUAL CHANGES ... 7-1
7-1. Introduction ... 7-1
7-3. Manual Changes ... 7-1
7-6. Manual Change Instructions ... 7-3
VIII SERVICE ... 8-1
8-1. Introduction ... 8-1
8-3. Safety Considerations ... 8-1
8-9. Recommended Test Equipment ... 8-5
8-11. Service Aids ... 8-5
8-16. Repair ... 8-5
8-17. Factory Selected Components ... 8-5
8-19. Disassembly and Reassembly
Procedures ... 8-5
8-24. Basic Circuit Descriptions ... 8-7
8-25. Linear Integrated Circuits ... 8-7
Section Page
8-30. Digital Integrated Circuits and Symbols .. 8-7
8-55. Troubleshooting ... 816
8-59. Standard Instrument Checkout ... 8-16
8-64. HP-IB Instrument Checkout ... 8-69
8-70. Block Diagram Circuit Descriptions ... 8-117
8-71. Service Sheet 1 ... 8-117
8-75. Service Sheet 2 ... 8-118
8-87. Service Sheet 3 ... 8-122
8-114. Service Sheet 4 ... 8-144
8-117. Command Mode Operation ... 8-144
8-130. Data Mode Operation ... 8-147
Type manuel:
manuel de réparation
Pages:
206
Taille:
11.45 Mbytes (12006074 Bytes)
Langue:
english
Révision:
Manuel-ID:
00436-90034
Date:
1984 07
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2023 06 04
MD5:
6cb74653e5469f32fff03f51186b710c
Téléchargements:
0
Information
Only the service part from the manual.
Type manuel:
Service et Manuel de l'utilisateur
Pages:
341
Taille:
7.02 Mbytes (7365699 Bytes)
Langue:
english
Révision:
Manuel-ID:
TM 11-6625-2969-14&P
Date:
1980
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2023 06 04
MD5:
bdf9ca97e1bbd89fd61198fe5c5530ba
Téléchargements:
1
Ajouter un commentaire
Conditions générales
Ces conditions générales contiennent des règles sur l'affichage des commentaires. En soumettant un commentaire, vous déclarez que vous approuvez ces règles :
- Bien que l'administrateur tente de modérer les commentaires, il est impossible que chaque commentaire ait été modéré à un moment donné.
- Vous reconnaissez que tous les commentaires expriment les points de vue et les opinions de l'auteur original et non ceux de l'administrateur.
- Vous acceptez de ne publier aucun contenu qui est sciemment faux, obscène, haineux, menaçant, harcelant ou envahissant la vie privée d'une personne.
- L'administrateur a le droit de modifier, déplacer ou supprimer tout commentaire pour une raison quelconque et sans préavis.
Le non-respect de ces règles peut entraîner l'interdiction de tout commentaire ultérieur.
Ces conditions générales sont sujettes à changement à tout moment et sans préavis.
Commentaires (2)
I have added another 436a Manual, maybe it is helpful.
Oliver
00436-90053 contains only Sections 1 through 6. Section 8 (schematics) is in 00436-90034. Nobody seems to have Section 7 (Manual Changes).