General Radio Company 1362 Oscillator
Fabricant:
Image 1 de 2
Image 2 de 2
Si vous avez d'autres photos ou manuels pour les
General Radio Company 1362 vous pouvez télécharger les fichiers ici .
Modèle:
1362
Date:
1967
Catégorie:
Groupe:
Description:
UHF Oscillator
Information
The 1362 UHF Oscillator (Figure 1-1) is a general-purpose
Oscillator for the radio-frequency laboratory. Covering the
calibrated range from 220 to 920 MHz, this Oscillator
provides adequate power to drive bridges, slotted lines,
impedance comparators, and other measuring equipment. The
output is brought through an attenuator, calibrated in
relative power levels, making the Oscillator suitable for
the testing of receivers. Direct sine-wave, square-wave, or
pulse amplitude modulation is possible. Amplitude modulation
free from incidental fm can be obtained with an external
diode modulator. Connected to a mixer, the Oscillator can be
used as the local Oscillator in a heterodyne receiver to
convert the GR 1236 I-F Amplifier, or a low-frequency
communications receiver, into a detector for uhf signals.
Square-wave and pulse amplitude modulation can be obtained
with the GR Type 1264 Modulating Power supply (Figure 1-2),
or leveled
output can be obtained with the GR Type 1263
Amplitude-Regulating Power supply.
Type manuel:
Service et Manuel de l'utilisateur
Pages:
28
Taille:
15.42 Mbytes (16170537 Bytes)
Langue:
english
Révision:
Manuel-ID:
1362-0100 B
Date:
1967 01 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2016 12 29
MD5:
74caa15bd4cfcac258bd356f61c30d4b
Téléchargements:
671
Information
SPECIFICATIONS
TABLE OF CONTENTS
INTRODUCTION - SECTION 1
INSTALLATION - SECTION 2
OPERATING PROCEDURE - SECTION 3
APPLICATIONS - SECTION 4
PRINCIPLES OF OPERATION - SECTION 5
SERVICE AND MAINTENANCE - SECTION 6