Collins Telecommunications DL-1 Autre
Fabricant:
Modèle:
DL-1
Date:
1966
Catégorie:
Groupe:
Description:
100 Watt Resistor Load

Information

The DL-1 is a 100-watt resistor load for use with any 100-watt Transmitter or Transceiver such as the 32S-1, 32S-3, or KWM-2. Refer to figure 1. Use of this dummy load allows alignment or adjustment of Transmitter circuits without sustained radiation of an interfering carrier. The DL-1 consists of four 50-ohm Globar resistors in a series-parallel arrangement to provide a 50-ohm resistive load. The DL-1 may be switched locally or remotely to select Antenna or dummy load for connection to Transmitter output. Jacks are provided for 6.3-volt ac 50- to 60-Hz relay coil supply, remote switching, and Transmitter and Antenna connections. The unit can be set on a table or desk or mounted on any chassis or rack frame by means of the two tapped holes on the bottom. As an alternate mounting, the four rubber feet can be removed and the unit mounted on a flat plate with four 6-32 screws.

plus

Service et Manuel de l'utilisateur
Type manuel:
Service et Manuel de l'utilisateur
Pages:
4
Taille:
442.67 Kbytes (453289 Bytes)
Langue:
english
Révision:
Third Printing
Manuel-ID:
523-0106000-101311
Date:
1966 01 01
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2017 08 04
MD5:
d6eca3d7bb677095b036b535aeb7af24
Téléchargements:
485