ARP Instruments Inc. Odyssey 2813 Synthétiseur
Fabricant:

Image 1 de 1
Si vous avez d'autres photos ou manuels pour les
ARP Instruments Inc. Odyssey 2813 vous pouvez télécharger les fichiers ici .
Modèle:
Odyssey 2813
Date:
1978
Catégorie:
Groupe:
Description:
Information
Three types of Odyssey models have been produced: I) 2800,
2) 2810-2815 and 3) 2820-2823. The model and serial number
are located at the rear or bottom of the Odyssey chassis.
Except for 2800, a typical number might read: 2813-0490. For
model 2800, the first two digits of the serial number denote
the model, such as: 28490. Listed below are the board
identification numbers for each model; they will be
referenced in the service manual by model number for easy
identification.
Model Changes
The Odyssey has undergone major cosmetic and electrical
changes since its original production in 1972, however, the
functional capabilities have remained virtually unchanged.
The following are the most noticeable physical differences
among models:
MODEL 2800
Black and white face panel (some later models have black and
gold face panels).
Pitch Bend knob
No Factory installed interface jacks.
Wrap around vinyl bottom cover.
MODEL 2810-2813
Black and gold face panel.
New style power switch.
Factory installed interface jacks*
Pitch Bend knob. (Some later models have PPC.)
Wrap around vinyl bottom cover.
MODEL 2820-2823 (current model, Odyssey '78)
Black and orange face panel.
Steel chassis Leather endblocks -
PPC
The major electrical changes found in the Odyssey-II as
compared to the Odyssey-I are:
1. Uses 24db/octave filter in place of 12db/? octave.
2. Improved VCO design for better tracking# and stability.
3. Improved Power Supply regulation.
4. Improved Keyboard current source for CV generation.
5. Improved S/H memory circuit design.
Type manuel:
manuel de réparation
Pages:
44
Taille:
11.54 Mbytes (12101282 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
1978 01 01
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2017 10 15
MD5:
4d0d54d49eb787036dcab9aabff8b04d
Téléchargements:
4041
Information
This service manual is divided into three major sections: A)
Circuit Descriptions, B) Trim Procedures, and C) Board Test
Points. The circuit descriptions should be consulted when a
problem is suspected in a particular area of the instrument.
The trim procedures should be used to verify calibrations or
when a component has been changed. The board test points are
a quick reference to verify circuits with suspected problems
and should be checked whenever a problem has been identified.
Ajouter un commentaire
Conditions générales
Ces conditions générales contiennent des règles sur l'affichage des commentaires. En soumettant un commentaire, vous déclarez que vous approuvez ces règles :
- Bien que l'administrateur tente de modérer les commentaires, il est impossible que chaque commentaire ait été modéré à un moment donné.
- Vous reconnaissez que tous les commentaires expriment les points de vue et les opinions de l'auteur original et non ceux de l'administrateur.
- Vous acceptez de ne publier aucun contenu qui est sciemment faux, obscène, haineux, menaçant, harcelant ou envahissant la vie privée d'une personne.
- L'administrateur a le droit de modifier, déplacer ou supprimer tout commentaire pour une raison quelconque et sans préavis.
Le non-respect de ces règles peut entraîner l'interdiction de tout commentaire ultérieur.
Ces conditions générales sont sujettes à changement à tout moment et sans préavis.
Commentaires