A.B.I. Electronics Rammaster Compact Autre
Fabricant:
Pas d'image disponible!
Peut-être que vous pouvez envoyer une image pour le
A.B.I. Electronics Rammaster Compact ?
Si vous avez d'autres manuels pour les
A.B.I. Electronics Rammaster Compact, vous pouvez télécharger les fichiers ici .
Modèle:
Rammaster Compact
Date:
1993
Catégorie:
Groupe:
Description:
High speed Memory Tester
Information
The basic function of the Rammaster Compact is to perform
a full speed functional test on DRAMs, SRAMs, SIMMs and
SIPs using a variety of test algorithms to ensure reliable
and rapid results. The test is performed by reconfigurable
HARDWARE, allowing most memories to be tested at their
theoretical full speed. Any malfunctioning memory cell
results in a FAIL indication, and in the case of SIMM and
SIP modules the faulty bit(s) is/are identified on the
integral LCD display so that the module can be repaired.
Additional facilities are also provided, amongst them
test loops that can be used for goods inwards inspection
or detecting intermittent faults. The supply voltage
to the IC under test can be varied by ±5% during the
test to simulate actual circuit conditions. Since the
Rammaster Compact contains an extensive memory IC library,
it is not necessary to programme the unit other than
to select the IC part type. The unit is equipped with
sockets covering the majority of Dual in Line (DIL),
SIMM and SIP packages, and a range of adaptors are
available for SOJ and ZIP packages and also for 72 pin
PS/2 type SIMM modules. The RamMaster is capable of being
upgraded and is designed to test the components of
tomorrow.
Type manuel:
Manuel de l'utilisateur
Pages:
14
Taille:
5.34 Mbytes (5603237 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2013 03 16
MD5:
c32fb4becb3a75d2e6134f42e948fa90
Téléchargements:
1069
Information
DC INPUT 1
BATTERY ELIMINATOR 1
SWITCHING ON 2
USING THE MENUS 2
SELECTING THE MEMORY TO TEST 3
SELECTING THE TEST MODE 4
SELECTING THE TEST SPEED 4
INSERTING THE IC OR MODULE 5
TESTING THE IC OR MODULE 7
USING THE 72 PIN (PS2) SIMM ADAPTOR 8
USING THE ZIP ADAPTOR 9
USING THE SOJ ADAPTOR 9
USING CONFIG MODE 9
TEST ALGORITHM 9
SUMMARY OF TEST ALGORITHMS 11
TEST VCC VOLTAGE 11
AUTO POWER OFF 11
ERROR COUNT 11
SELF TEST MODE 12
SPECIFICATION