Tektronix 492 Spectre
Fabricant:
Modèle:
492
Date:
1979
Catégorie:
Groupe:
Description:

Information

The Tektronix 492 and 496 are two spectrum analyzers that go where you go. Their compact size, light weight, and rugged design combine to offer unmatched portability in laboratory quality analyzers. Single-handle carry and portable form factor make them ready to travel. The 492 and 496 move as easily in the field as in the design lab or systems test area. They even fit under an airplane seat. You can count on the same exceptional performance no matter where you're working. If its antenna test measurements, point-topoint transmission maintenance, or any number of critical field applications, the 492 and 496 work with you. For on-site applications, reduced warmup time means reduced measurement time. Typical long-term frequency drift of 5 kHz/10 minutes after 30 minute warm up for the 492 and 492P; 2 kHz/10 minutes after 30 minute warm up for the 496 and 496P, Here's Proof of Their Performance The Tektronix 492 has the widest amplitude calibrated frequency range of any spectrum Analyzer on the market: 50 kHz to 220 GHz —to 21 GHz in coax, from 18 GHz to 220 GHz using Tektronix external waveguide mixers. The VHF/UHF 496 covers from 1 kHz to 1.8 GHz. They offer 80 dB dynamic range on-screen and excellent sensitivity, with an average noise level of — 123dBm at 100 Hz resolution bandwidth for the 492, -127 dBm at 30 Hz resolution bandwidth for the 496. Low phase noise —70 dBc at only 3 kHz offset —for accurate small-signal analysis. High stability for signal source spectral purity analysis, with residual FM of no more than 50 Hz peak-to-peak for the 492, 10 Hz peakto- peak for the 496. For precise measurement of signal differences, there's amplitude comparison in super-fine 0.25 dB steps. And the 496 provides 1 kHz frequency resolution in AF mode. All this and more in one compact package that goes where you go. Programmability/IEEE (GPIB) Compatibility The GPIB Interface enables full control of all measurement settings. Additional control of horizontal (span) and vertical display (1 dB to 15 dB/div) and smart functions (such as signal search) provide added measurement versatility. A desktop computer or computer controller (4052A or 4041) and a 492P or 496P Spectrum Analyzer provide repetitive measurements, data collection, and consistent, rapid results. Automated testing and monitoring may include data correction and analysis enabling complex measurements such as total harmonic distortion and power spectral density. The thermal printer of the 4041 or hard copiers for 4052A simplify documenting tests and spectral displays in hard copy form. Programmability Now—or Later Most manual 490 Series spectrum analyzers can be converted into fully programmable, GPIB compatible analyzers. Conversion may be performed via the Tektronix Service Center near you. Easy to Use—Anywhere Tektronix designed the 492 and 496 to handle your measurement task with microprocessor- aided ease. Setting frequency, span and reference level is a simple three-knob operation. Most-used functions are automatically controlled. Digital storage and signal processing eliminate time-consuming display adjustments. And constant tuning rate helps you position a signal quickly and accurately. All part of the convenience and capability the 492 and 496 deliver, on site or on the bench.

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages:
303
Taille:
14.91 Mbytes (15630373 Bytes)
Langue:
english
Révision:
Revised
Manuel-ID:
070-3783-01
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2014 05 25
MD5:
326a72baa74fe663b49d33a6d8ea38c4
Téléchargements:
1898

Information

Service Manual Volume I Introduction The Service manual consists of two volumes that contain information necessary to test, adjust, and service the Portable Rackmount/Benchtop 492 492P/Spectrum Analyzer. The intent is to provide as complete information as possible as an aid in servicing this instrument. The Table of Contents at the beginning of Volume 1 lists contents of each section contained within Volume 1. Change information that involves manual corrections and/or additions pending manual reprint and bind, is located at the back of the Service manual in the CHANGE INFORMATION section. History information with the updated data is integrated into the text or diagrams when a page or diagram is updated. Revised pages have a revision date in the lower inside corner of the page. The manual may contain revisions that do not apply to your instrument; however, history information with updated data, is integrated into the text or diagram when the page or diagram is revised.

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages:
109
Taille:
4.44 Mbytes (4659013 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2014 05 25
MD5:
35b7b44fcf62ef6dc71405354038b790
Téléchargements:
1419

Information

Service Manual Volume 2 - C Replaceable Mechanical Parts & Manual Change Information

plus

Fiche technique
Type manuel:
Fiche technique
Pages:
5
Taille:
4.23 Mbytes (4431347 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2014 05 23
MD5:
4ad6391901e13bbd97a963c8ad026115
Téléchargements:
2172
Fiche technique
Type manuel:
Fiche technique
Pages:
20
Taille:
9.39 Mbytes (9848000 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2014 05 23
MD5:
4cb79f46701fb4f8035dd4f648aff3e9
Téléchargements:
1396
manuel de réparation
Type manuel:
manuel de réparation
Pages:
342
Taille:
33.41 Mbytes (35029684 Bytes)
Langue:
english
Révision:
Manuel-ID:
070-3784-01
Date:
1987 12 01
Qualité:
Électronique de documents, numérisation sans, bien lisible.
Date de transfert:
2019 09 13
MD5:
93e923a2be58c41bf95d7da6daf98510
Téléchargements:
1265

Information

Service Manual Volume 2 Includes a lot of Manual Change Informations

plus

Manuel de l'utilisateur
Type manuel:
Manuel de l'utilisateur
Pages:
54
Taille:
1.61 Mbytes (1685266 Bytes)
Langue:
english
Révision:
Revision 2, May 1985
Manuel-ID:
070-2729-01
Date:
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2011 06 13
MD5:
cf36e0c858c19384a1352b789020d9c7
Téléchargements:
2060
manuel de réparation
Type manuel:
manuel de réparation
Pages:
134
Taille:
6.20 Mbytes (6500435 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2014 05 25
MD5:
ddc71154727884dd7109ae5fa62adb01
Téléchargements:
1524

Information

Service Manual VOLUME 2 - A REPLACEABLE ELECTRICAL PARTS

plus

Manuel de l'utilisateur
Type manuel:
Manuel de l'utilisateur
Pages:
81
Taille:
3.89 Mbytes (4078466 Bytes)
Langue:
english
Révision:
First Printing
Manuel-ID:
070-2726-01
Date:
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2011 06 13
MD5:
ea57d2b0f49dbc9044f7df71bc2b1a35
Téléchargements:
1010
manuel de réparation
Type manuel:
manuel de réparation
Pages:
254
Taille:
13.29 Mbytes (13936162 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2014 05 25
MD5:
eadb934c8f3b12e896045a6fd7ebc041
Téléchargements:
1714

Information

Service Manual Volume 2 - B DIAGRAMS & CIRCUIT BOARD ILLUSTRATIONS

plus