Informations sur l'appareil:

Kenwood SM-220 Autre
Fabricant:
Kenwood
Modèle: SM-220
Date: 1984
Catégorie: Radio et des communications
Groupe: Autre
Description: Station Monitor
Information:
                                    1. Station Monitor SM-220 is designed specifically for
measurement of the TS-820 and TS-520 series SSB transceivers.
2. The unit is comprised of a monitor-scope, oscilloscope
and two-tone audio generator. A Pan Display option is also
available.
3. The monitor-scope will display transmitted waveform from
1.8 MHz to 54 MHz, 5W-2 KW PEP, and to 150 MHz, 100W PEP.
Drive input terminals permit trapezoid waveform observation.
4. The oscilloscope features high sensitivity (better than
20 mV/DIV) and wide bandwidth (2 Hz — 10 MHz), and makes
possible measurement of various waveform
types. Receiver IF can be dispalyed directly from the
TS-820S IF-OUTPUT terminal.
5. The two-tone audio generator provides 1000 Hz and 1575 Hz
tone individually or simultaneously.
6. A plug-in Pan Display is available as an option: For the
TS-820S, specify the BS-8, or for the TS-520S specify the BS-5,
7. Horizontal trace tilt can be adjusted from the rear of
the unit without removing the case.
8. The blue-green (B-31) phosphor CRT assures excellent
brightness and contrast for extended fatigue free viewing.
4

Ces manuels sont disponibles pour les équipements ci-dessus :

Type de document: Service et Manuel de l'utilisateur Kenwood-8350-Manual-Page-1-Picture
Nombre de pages: 20
Taille du fichier: 2.85 Mbytes (2990211 Bytes)
langue: Anglais
Révision:
Document ID/Numéro: B50-2856-00 (G) (K) (W)
Date: 01 janvier 1984
qualité: Document scanné, tous les lisible.
Chargé sur:
MD5: 3251bfe17fab2ab417a2ae6d2f3086b5
Téléchargements: 165 depuis 08 janvier 2017
Information:
1.
Specifications ...  3
2. Introduction and features ...  4
3. Cabling requirements and preliminary
instructions ...  5
4. Controls, indicators and connectors ...  6
5.
Operation ... 
8
6. Circuit description ... 12
7. Adjustments and maintenance ... 14
8. Pan display operation ... 14
9. Schematic diagrams ... 17
Illustrations and tables ...  19
Figure 3-1. Assembled U HF connector cable ...  5
3-2. Assembling a BNC connector cable.. .. 5
4-1. Front
panel ...  6
4-2. Rear
panel ...  7
5-1. Cabling for transmit and receive
displays ...  8
5-2. TS-820S IF output matching ...  9
5-3. *Single tone input (2 examples) ... 10
5-4. * Keyed waveform (2) ... 10
5-5. *Two-tone modulation envelope (2) 10
5-6. ♦Voice modulation envelope (2) ... 10
5-7. *Trapezoid waveforms (2) ... 10
5-8. Connection forTrapezoid waveform
observation ... 11
5-9. *RTTY cross patterns (3) ...  11
5-10. Cabling for RTTY cross pattern
observation ... 12
5-11. *Lissajous' figure example (1) ... 12
6-1. Block
diagram ... 13
7-1. Adjustment access (case bottom) ... 14
7-2. *Two-tone Oscillator waveform (2) ... 14
8-1. Installing the Pan Display
adaptor ... 14
8-2. Pan Display adjustment ... 15
8-3. * Pan Display waveforms (3) ... 15
8-4. Pan Display output cable ... 16
8-5. TS-520 series IF sample cable
installation ... 16
8-6. TS-820 series IF sample cable
installation ... 16
♦ Scope display examples (number of conditions illustrated).
Table 5-1. Control settings, transmit signal
observation ...  8
5-2. Control settings,Trapezoid waveform
observation ... 10
5-3. Control settings, RTTY cross pattern
observation ... 11
5-4. Control settings, oscilloscope
operation ... 12
Kenwood-8350-Manual-Page-1-Picture


Type de document: manuel de réparation Kenwood-8362-Manual-Page-1-Picture
Nombre de pages: 24
Taille du fichier: 1.53 Mbytes (1604570 Bytes)
langue: Anglais
Révision:
Document ID/Numéro:
Date:
qualité: Document scanné, la lecture en partie mal, en partie illisible.
Chargé sur:
MD5: 1c0b31904a291d38e0d3e4de51b972e6
Téléchargements: 111 depuis 08 janvier 2017
Information:
1.
Specifications ...  3
2. Introduction and features ...  4
3. Cabling requirements and preliminary
instructions ...  5
4. Controls, indicators and connectors ...  6
5.
Operation ... 
8
6. Circuit description ... 12
7. Adjustments and maintenance ... 14
8. Pan display operation ... 14
9. Schematic diagrams ... 17
Illustrations and tables ...  19
Figure 3-1. Assembled U HF connector cable ...  5
3-2. Assembling a BNC connector cable.. .. 5
4-1. Front
panel ...  6
4-2. Rear
panel ...  7
5-1. Cabling for transmit and receive
displays ...  8
5-2. TS-820S IF output matching ...  9
5-3. *Single tone input (2 examples) ... 10
5-4. * Keyed waveform (2) ... 10
5-5. *Two-tone modulation envelope (2) 10
5-6. ♦Voice modulation envelope (2) ... 10
5-7. *Trapezoid waveforms (2) ... 10
5-8. Connection forTrapezoid waveform
observation ... 11
5-9. *RTTY cross patterns (3) ...  11
5-10. Cabling for RTTY cross pattern
observation ... 12
5-11. *Lissajous' figure example (1) ... 12
6-1. Block
diagram ... 13
7-1. Adjustment access (case bottom) ... 14
7-2. *Two-tone Oscillator waveform (2) ... 14
8-1. Installing the Pan Display
adaptor ... 14
8-2. Pan Display adjustment ... 15
8-3. * Pan Display waveforms (3) ... 15
8-4. Pan Display output cable ... 16
8-5. TS-520 series IF sample cable
installation ... 16
8-6. TS-820 series IF sample cable
installation ... 16
♦ Scope display examples (number of conditions illustrated).
Table 5-1. Control settings, transmit signal
observation ...  8
5-2. Control settings,Trapezoid waveform
observation ... 10
5-3. Control settings, RTTY cross pattern
observation ... 11
5-4. Control settings, oscilloscope
operation ... 12
Kenwood-8362-Manual-Page-1-Picture


Type de document: manuel de réparation Kenwood-10754-Manual-Page-1-Picture
Nombre de pages: 29
Taille du fichier: 2.88 Mbytes (3024929 Bytes)
langue: Anglais
Révision:
Document ID/Numéro:
Date:
qualité: Document scanné, tous les lisible.
Chargé sur:
MD5: fe3b6821f4299ca9eea1771f15271109
Téléchargements: 34 depuis 15 avril 2018
Information:
1.
Specifications ...  3
2. Introduction and features ...  4
3. Cabling requirements and preliminary
instructions ...  5
4. Controls, indicators and connectors ...  6
5.
Operation ... 
8
6. Circuit description ... 12
7. Adjustments and maintenance ... 14
8. Pan display operation ... 14
9. Schematic diagrams ... 17
Illustrations and tables ...  19
Figure 3-1. Assembled U HF connector cable ...  5
3-2. Assembling a BNC connector cable.. .. 5
4-1. Front
panel ...  6
4-2. Rear
panel ...  7
5-1. Cabling for transmit and receive
displays ...  8
5-2. TS-820S IF output matching ...  9
5-3. *Single tone input (2 examples) ... 10
5-4. * Keyed waveform (2) ... 10
5-5. *Two-tone modulation envelope (2) 10
5-6. ♦Voice modulation envelope (2) ... 10
5-7. *Trapezoid waveforms (2) ... 10
5-8. Connection forTrapezoid waveform
observation ... 11
5-9. *RTTY cross patterns (3) ...  11
5-10. Cabling for RTTY cross pattern
observation ... 12
5-11. *Lissajous' figure example (1) ... 12
6-1. Block
diagram ... 13
7-1. Adjustment access (case bottom) ... 14
7-2. *Two-tone Oscillator waveform (2) ... 14
8-1. Installing the Pan Display
adaptor ... 14
8-2. Pan Display adjustment ... 15
8-3. * Pan Display waveforms (3) ... 15
8-4. Pan Display output cable ... 16
8-5. TS-520 series IF sample cable
installation ... 16
8-6. TS-820 series IF sample cable
installation ... 16
♦ Scope display examples (number of conditions illustrated).
Table 5-1. Control settings, transmit signal
observation ...  8
5-2. Control settings,Trapezoid waveform
observation ... 10
5-3. Control settings, RTTY cross pattern
observation ... 11
5-4. Control settings, oscilloscope
operation ... 12
Kenwood-10754-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics