Informations sur l'appareil:

Stoelting 2217G Congélateur
Fabricant:
Stoelting
Modèle: 2217G
Date:
Catégorie: Appareils électroniques domestiques
Groupe: Congélateur
Description: Slush Freezers
Information:
                                    Models 100C, 100F, and 2217G freezers are gravity fed. The
freezers are equipped with fully automatic controls to
provide a uniform product. The freezers are designed to
operate with most neutral bases and concentrated flavors.

Ces manuels sont disponibles pour les équipements ci-dessus :

Type de document: Service et Manuel de l'utilisateur Stoelting-8332-Manual-Page-1-Picture
Nombre de pages: 52
Taille du fichier: 597.06 Kbytes (611389 Bytes)
langue: Anglais
Révision:
Document ID/Numéro: 513554
Date:
qualité: Électronique de documents, numérisation sans, bien lisible.
Chargé sur:
MD5: 3952f9554aed4ae0b3cee3e0d38d3502
Téléchargements: 589 depuis 07 janvier 2017
Information:
SECTION 1
INTRODUCTION ... 1

1.1
Descriptions ... 1

1.2
Specifications ... 1

SECTION 2	INSTALLATION
INSTRUCTIONS ... 3

2.1	Safety
Precautions ... 3

2.2	Shipment and
Transit ... 3

2.3	Freezer
Installation ... 3

2.4	Adjusting Cup
Dispensers ... 7

SECTION 3	INITIAL SET-UP AND OPERATION
 ... 9

3.1	Operator's Safety
Precautions ... 9

3.2	Operating Controls and
Indicators ... 9

3.3	Draining the Freezer For Disassembling and
Cleaning ... 10

3.4	Disassembly and Cleaning of Freezer
Parts ... 10

3.5	Sanitizing The Freezers and Freezer
Parts ... 15

3.6	Assembly of
Freezer ... 15

3.7	Mix
Information ... 17

3.8	Freeze Down and
Operation ... 17

3.9	Dispensing
Product ... 17

3.10	Routine Cleaning
 ... 17

3.11	Preventative
Maintenance ... 17

3.12	Extended
Storage ... 18

SECTION 4	DECALS AND
TAGS ... 21

4.1	How to Order Decals and
Tags ... 21

SECTION 5	REFRIGERATION COMPONENTS AND
ADJUSTMENTS ... 23

5.1	Refrigeration System
 ... 23

5.2
Compressor ... 23

5.3
Condenser ... 23

SECTION 6	ELECTRICAL SYSTEM OPERATION AND
ADJUSTMENTS ... 27

6.1	24 Hour
Timer ... 27

6.2	Electronic Torque
Control ... 27

SECTION 7	MAJOR COMPONENT REMOVAL AND
INSTALLATION ... 29

7.1	Introduction
 ... 29

7.2	Condenser Fan
Removal ... 29

7.3	Drive Motor Removal
 ... 29

7.4	Compressor Removal
 ... 29

7.5	Compressor Installation
 ... 30

7.6	Drive Motor Installation
 ... 31

7.7	Condenser Fan Installation
 ... 31

SECTION 8	TROUBLESHOOTING
 ... 33

8.1	Compressor Run Capacitor Open, Shorted or
Blown ... 34

8.2	Compressor Relay Defective or Burned Out
 ... 34

8.3	Compressor Starts and Runs, But Short Cycles On Overload
Protector ... 34

8.4	Compressor Runs
Continuously ... 34

8.5	Unit
Noisy ... 34

8.6	Compressor Will Not
Start ... 34

8.7	Compressor Will Not Start - Hums But Trips On Overload
Protector ... 35

8.8	Compressor Starts, But Does Not Switch Off of Start
Winding ... 35
8.9	Compressor Start Capacitor Open, Shorted or
Blown ... 35

8.10	Freezer Will Not
Start ... 35

8.11	Drive Motor Overload Trips (Freezer Shuts Down When
Running)
 ... 35

8.12	Compressor Will Not Run, But Drive Motor
Runs ... 35

8.13	Product Dispenses
Incorrectly ... 35

8.14	Product is Too Thin
 ... 36

8.15	Agitator Does Not
Rotate ... 36

8.16	No Ice Crystals On Initial Freeze
Down ... 36

8.17	Excessive Ice Crystals Above Divider Plate
 ... 36

8.18	Spigot Leaking or
Stuck ... 36

SECTION 9 REPLACEMENT PARTS AND REFERENCE
DRAWINGS ... 37

9.1	How to Order
Parts ... 37

9.2	Spigot Assembly
Parts ... 37

9.3	Model 100C Parts
List ... 39

9.4	Model 100F Parts
List ... 41

9.5	Model 2217G Parts
List ... 43
Stoelting-8332-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics