Data Precision 8200 Calibrateur
Fabricant:
Modèle:
8200
Date:
1981
Catégorie:
Groupe:
Description:
6 1/2 - Digit Voltage & Current CALIBRATOR

Information

The Data Precison Mode! 8200 Calibrator is a precision 6 Vi-digit (1,048,575 counts), microcomputer-controlled, voltage and current standard, providing a completely isolated analog signal from O.tyV to 100V (or up to 1000V with the 1KV option), or 1^A to 100mA, tor the test and calibration of high-precision analog circuits. When enhanced with the optional IEEE488 bus Interface, the Model 8200 may be remotely programmed as a voltage or current standard for ATE applications. The Model 8200 is configured in a standard 3V?-inch high, 19-inch wide metal case, suitable for rack mounting (with the rack mounting option, A6. Its light weight of less than 17 pounds, and its universal powering capability (115 or 230Vac) make the Model 8200 a convenient, portable standard for use in a variety of test/inspection environments. 1.2 FEATURES The Model 8200 provides three selectable full scale ranges for dc voltage generation (100mV, 10V, and 100V) and one range scale for dc current generation (100mA). Polarity for each is independently selected by front-panel control, while the decimal point is positioned automatically in the 6Vz -decade display. A field-installable 1KV option provides an extended range up to 1000V. Accuracy of the analog voltage output is within 10ppm of the reading + 1ppm of the full scale range. Accuracy of the current output is within 0.01% of the reading + VA. High speed settling is compatible with the designed use of the Model 8200 as part of a computer-controlled ATE system. Output values settle from one level to the other in the same range within 1ms, and within 15ms when a range change has been made. Stable outputs are designed for Song periods of unattended use. Long-term drift of less than 10ppm may be expected over 60 days. Temperature coefficients over an operating range from 15°C to 35CC introduce 1ppm/°C of reading + 0.2ppm of full scale range on the 10V scale, and 2ppm/°C of reading + 0.2ppm of full scale range on either 100mV or 100V ranges. The dc current temperature coefficient is 10ppm of reading and 2ppm of range. Front-panel controls and the display operate in a “full duplex” mode. That is, the operator indicates his desired change in output to the microcomputer, while the display is controlled directly by the microcomputer, after the change in value has been verified to be a valid one and then transmitted by the microcomputer to the display. Front-panel setup of varying output magnitudes is designed for optimum human-engineered convenience. Each of the 6 decade selectors at the front panel may be operated in either clockwise or counterclockwise (increment or decrement action) without limit so that the output value may be changed by the selected incremental resolution without having to change decade selectors . The instrument performs full carry or full borrow to or from higher decades to the limits of the selected full scale range. Fail-safe operating modes protect the tested components from inadvertent high signals. The Model 8200 returns to 0 when a change in polarity is commanded, or when a range scale is changed. Remote programming is field installable. The IEEE488 bus Interface assembly may be installed within the Model 8200 chassis as a user-installable procedure. The assembly is plug-connected within the Calibrator, and the programming has been installed for the remote operation.

plus

Service et Manuel de l'utilisateur
Type manuel:
Service et Manuel de l'utilisateur
Pages:
10
Taille:
452.68 Kbytes (463548 Bytes)
Langue:
english
Révision:
First Edition
Manuel-ID:
62-5018
Date:
1981 01 01
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2016 12 29
MD5:
08e2224fa2ebf3b175577747cd8caaa8
Téléchargements:
1004
manuel de réparation
Type manuel:
manuel de réparation
Pages:
49
Taille:
25.15 Mbytes (26372830 Bytes)
Langue:
english
Révision:
First Edition
Manuel-ID:
62-5018
Date:
1981 01 01
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2016 12 29
MD5:
6a39c127d7f3fd7644658e11ad3d630f
Téléchargements:
1284

Information

1. INTRODUCTION 1.1 General Description 1.2 Features 1.3 Installation 1.4 Powering the 8200 2. SPECIFICATIONS & OPERATION 2.1 Specifications 2.1.1 Voltage Mode 2.1.2 Current Mode 2.1.3 Voltage/Current Mode Performance 2.1.4 Options 2.1.5 IEEE488 Option 2.2 Operation 2.2.1 Front Panel Features 2.2.2 Rear Panel Features 2.3 Operating Procedures 2.3.1 Powering the Calibrator 2.3.1.1 Power Up/Shut Down 2.3.2 Application Setups 2.3.3 Local Control 2.3.4 Shut Down Procedures 2.4 Remote Control 2.4.1 IEEE488 Setup 2.4.2 Procedure 2.4.3 Returning to Local Control 3. PRINCIPLES OF OPERATION 3.1 System Block Diagram 3.2 Program Control 3.2.1 General 3.2.2 Program Subroutines 3.2.3 Port Addresses 3.2.4 RAM Storage 3.3 Generating the Calibrator Output 3.3.1 Implementation Sequence 3.3.2 Generating the "Octade” States 3.3.3 Binary-to-Octal Conversion 3.3.4 Scaled Voltage Output, Plus and Minus 3.3.5 Generating a Current Output 3.4 CHANGING THE OUPTUT VALUE 3.4.1 Program Control 3.4.2 Hardware Implementation to Detect Switch Changes 3.4.3 Transferring Binary Values to The D/A Converter 3.5 Display 3.6 Digital Control Implementation 3.7 Power Supplies 3.7.1 Main Power 3.7.2 Digital Control Power 3.7.3 Isolated Analog Circuit Power 4. CALIBRATION & MAINTENANCE 4.1 General 4.2 Field Recalibration 4.2.1 Test Equipment Required 4.2.2 Obtaining Access to the Adjustments 4.2.3 Field Recalibration Procedure 4.3 Complete Recalibration (Metrology Standards) 4.3.1 Equipment Required 4.3.2 Test Setup and Preliminary Operations 4.3.3 Offset Adjustment 4.3.4 Linearization Adjustments 4.3.5 Carry Adjustment 4.3.6 Final Calibration 4.4 Maintenance 4.4.1 General 4.4.2 Troubleshooting Strategy 4.4.3 Power Supply Checks 4.5 Power Supply Assembly Checks 4.6 Power and Timing Checks 4.7 Digital Control Board Maintenance 4.8 D/A Converter Board Maintenance 5. PARTS LISTS 5.1 Model 8200 Calibrator Assemblies 5.2 Parts Lists 5.2.1 Ordering Requirements 5.2.2 Display Assembly 5.2.3 20-Bit D/A Assembly 5.2.4 Digital PCB Assembly 5.2.5 Switch Card Assembly 5.2.6 Rear Panel Assemblies

plus