Radiosystem RS 9694 Communications Service Monitor
Fabricant:
Modèle:
RS 9694
Date:
1986
Catégorie:
Groupe:
Description:
Measuring Coupler

Information

The main purpose of the measuring coupler is to provide the reflection alarm unit with rectified signal of the output power to the Antenna and reflected power. Two coupled signals are also made available for testing with, for example, a spectrum analyser. The input is to connector J2, the output from connector J1. The samples are obtained via four directional couplers. The rectified signal are available at two levels via connector J5. The other samples are available from separate connectors, J3 and J4. Typical value: Middle frequency 465 MHz Forward Po = 30 W Uo = 0,427V Backward Pr = 3.0 W Uo = 0,477V Refl. fact. 20 J3 and J4 -40dB

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages:
10
Taille:
4.32 Mbytes (4527177 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
1986 01 01
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2016 10 04
MD5:
2d6e238f4b9b3f69f8f2b24f94688169
Téléchargements:
659

Information

Content ... 1 Description ... 2 Circuit Diagram RS9694 ... RS969402 Outline Drawing RS9694 ... RS969004 Component Location RS9694 ... RS9Ô9003 Component Location PC9694 ... '..RS969413 Component Location PC9691A ... RS969103 Component Location PC9691B ... RS9691 13 Component Location PC9694A ... RS969414 Component Location PC9694B ... RS969415 Parts List Meas. Coupler ... RS9694 Parts List Meas. Coupler Card ... PC9691A Parts List Meas. Coupler Card ... PC9691B Parts List Meas. Coupler Card ... PC9694A Parts List Meas. Coupler Card ... PC9694B

plus