Informations sur l'appareil:

Ametek Advanced Measurement Technology 5113 Amplificateur
Fabricant:
Ametek Advanced Measurement Technology
Modèle: 5113
Date: 2002
Catégorie: Mètres
Groupe: Amplificateur
Description: Low Noise Preamplifier
Information:
                                    The Model 5113 Low-Noise Preamplifier provides high gain,
low-noise amplification of wideband signals from DC to 1
MHz, well suited for use with both SIGNAL RECOVERY and other
manufacturers’ signal processing instruments. Adjustable
high and low frequency rolloffs allow the bandwidth to be
reduced. Two inputs, with switchable coupling, allow either
differential or single-ended operation. Coarse gain is
selectable from x5 to x50,000 in a 1-2-5 sequence with a
fine gain control extending the range to xl to X 10,000. An
uncalibrated vernier allows finer adjustment of the gain.

The unit may be powered either from an external DC power
supply or from its internal sealed and maintenance-free
lead-acid batteries. These batteries recharge automatically
when a suitable external Power supply is connected. Other
features include an overload fast-recovery button, a
front-panel DC zero screwdriver control, and a battery test
facility.

Ces manuels sont disponibles pour les équipements ci-dessus :

Type de document: Manuel de l'utilisateur Ametek-8000-Manual-Page-1-Picture
Nombre de pages: 39
Taille du fichier: 287.92 Kbytes (294830 Bytes)
langue: Anglais
Révision:
Document ID/Numéro: 222144
Date: 01 janvier 2002
qualité: Électronique de documents, numérisation sans, bien lisible.
Chargé sur:
MD5: 8fc2006b0be9beda788767712993bef7
Téléchargements: 151 depuis 03 septembre 2016
Information:
Chapter One, Introduction

1.1	Model 5113
Preamplifier ... 1-1

1.2	Why use a
Preamplifier? ... 1-1

Chapter Two, Installation & Initial Checks

2.1
Installation ... 2-1

2.1.01
Introduction ... 2-1

2.1.02
Inspection ... 2-1

2.2	Initial
Checks ... 2-1

2.2.01
Introduction ... 2-1

2.2.02	Equipment
Required ... 2-1

2.2.03
Procedure ... 2-2

Chapter Three, Front and Rear Panels

3.1	Front
Panel ... 3-1

3.1.01	INPUT
Connectors ... 3-1

3.1.01	INPUT COUPLING
Button ... 3-1

3.1.03	RECOVER/Sleep
Button ... 3-2

3.1.04	GAIN (VERNIER)
Control ... 3-2

3.1.05	LF ROLL-OFF (SLOPE)
Control ... 3-3

3.1.06	HF ROLL-OFF (SLOPE)
Control ... 3-3

3.1.06	POWER
Switch ... 3-4

3.1.07	OUTPUT
Connector ... 3-4

3.2	Rear
Panel ... 3-4

Chapter Four, Front Panel Operation

4.1
Introduction ... 4-1

4.2
Operation ... 4-1

4.2.01
Power ... 4-1

4.2.02	Signal
Grounding ... 4-1

4.2.03	Signal Voltage and
Gain ... 4-1

4.2.04	DC Zero
Adjustment ... 4-2

4.2.05	Overload Fast
Recovery ... 4-2

4.2.06	Input Mode
Selection ... 4-2

4.2.07	Filter
Selection ... 4-2

4.2.08	Filter
Roll-Off ... 4-3

4.2.09	Special
Pages ... 4-3

4.2.10	Battery Operation, Test and
Charging ... 4-4
Chapter Five, Computer Operation

5.1
Introduction ... 5-1

5.2
Operation ... 5-1

5.2.01
Overview ... 5-1

5.2.02	RS232 Interface - General
Features ... 5-1

5.2.03	Choice of Baud
Rate ... 5-2

5.2.04	RS232 Interface - Command
Format ... 5-2

5.2	Command
Descriptions ... 5-3

Appendix A, Specifications Appendix B, Pinouts Appendix c,
Power supply Index

Warranty
 ... End of
Manual

Ametek-8000-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics