Fluke 5450A Calibrateur
Fabricant:
Image 1 de 1
Si vous avez d'autres photos ou manuels pour les
Fluke 5450A vous pouvez télécharger les fichiers ici .
Modèle:
5450A
Date:
1984
Catégorie:
Groupe:
Description:
Resistance Calibrator
Information
The Fluke 5450A Resistance Calibrator is designed to
facilitate manual or automated calibration of the resistance
measuring circuitry of high-quality digital multimeters
(DMMs). The 5450A provides cardinal point resistances in the
range of 1Ω to 100 ΜΩ. Resistances may be selected either at
decade points (e.g., 1Ω, 10Ω, 100Ω, etc.) or at xl.9 points
(e.g., 1.9Ω, 19Ω, 190Ω, etc.).
The 5450A display indicates the value of the selected
resistance and can also indicate the error of the instrument
being calibrated (the unit under test, or UUT), expressed in
percent or parts-per-million (ppm).
The 5450A may be controlled from the front panel or by
remote control via the IEEE-488 Interface bus. All functions
available on the front panel are also available over the
IEEE-488 bus.
The UUT may be connected directly to the 5450A front panel
terminals using banana plugs,
or to five-way low-thermal binding posts on the rear panel.
The 5450A is calibrated with its covers installed and may be
calibrated remotely via the IEEE-488 bus. Calibration
constants are stored in electrically alterable read-only
memory (EAROM).
Accessories available for the 5450A include a rack mounting
kit, rack mounting ears, and IEEE-488 Interface bus cables.
Type manuel:
Service et Manuel de l'utilisateur
Pages:
109
Taille:
9.60 Mbytes (10068017 Bytes)
Langue:
english
Révision:
Manuel-ID:
713800
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2016 02 06
MD5:
d87c93668ba60a50e0223d202e205189
Téléchargements:
1001
Information
1 INTRODUCTION AND SPECIFICATIONS 1-1
1-1. INTRODUCTION 1-1
1-2. SPECIFICATIONS
...
1-1
2 OPERATING INSTRUCTIONS
...
2-1
2-1. INTRODUCTION
...
2-1
2-2. SHIPPING INFORMATION 2-1
2-3. INPUT LINE POWER 2-1
2-4. INSTALLATION 2-1
2-5. IEEE-488 CONNECTION 2-1
2-6. CONTROLS AND INDICATORS 2-2
2-7. OPERATING NOTES ... 2-2
2-8. Rear Panel Settings 2-2
2-11. Connecting to a Unit Under Test 2-8
2-18. Powering Up the 5450A 2-8
2-19. Selecting an Output 2-9
2-20. Computing Error 2-9
2-21. 2-Wire Enhancement 2-10
2-22. REMOTE OPERATION 2-10
2-23. Introduction 2-10
2-24. Capabilities 2-11
2-25. Device Clear 2-11
2-26. Local/Remote Operation 2-11
2-27. Command Separators and Terminators
... 2-11
2-28. Remote Error Handling 2-11
2-29. Command Set
...
2-11
2-30. Programming
Examples ...
2-14
3 THEORY OF
OPERATION ...
3-1
3-1. INTRODUCTION
...
3-1
3-2. FUNCTIONAL DESCRIPTION 3-1
3-3. CIRCUIT DESCRIPTION 3-1
3-4. Power supply Circuit 3-1
3-8. Display Circuit 3-3
3-11. Digital Circuit 3-3
3-21. Analog Circuit 3-5
4 MAINTENANCE 4-1
4-1. INTRODUCTION
... 4-1
4-2. SERVICE INFORMATION
...
4-1
4-3. GENERAL MAINTENANCE
...
4-1
4-4. Setting Line Voltage
...
4-1
4-5. AC Line Power Fuse Replacement
... 4-4
4-6. Cleaning
... 4-4
4-7. Handling Precautions
... 4-4
4-10. Replacement of Selected
Components ... 4-5
4-11. Disassembly and Reassembly
... 4-5
4-22. PERFORMANCE TEST/CALIBRATION PROCEDURE ... 4-7
4-23.
Introduction ... 4-7
4-24. Calibration Philosophy
... 4-7
4-28. Calibration Procedure
...
4-9
4-37. Alternatre Calibration Procedures
... 4-21
4-38. TROUBLESHOOTING
...
4-22
4-39.
Introduction ... 4-22
4-40. Power supply Isolation
... 4-22
4-41. Analog Assembly Isolation
... 4-22
4-42. Display Assembly
Isolation ...
4-22
4-43. Digital Assembly Isolation
... 4-23
5 LIST OF REPLACEABLE PARTS ...
... 5-1
TABLE OF CONTENTS
... 5-1
5-1. INTRODUCTION
... 5-2
5-2. HOW TO OBTAIN PARTS
... 5-2
6 OPTIONS AND Accessories
... 6-1
7 REFERENCE INFORMATION
... 7-1
8 MANUAL CHANGE INFORMATION .
... 8-1
9 SCHEMATIC DIAGRAMS
... 9-1
TABLE OF CONTENTS
... 9-1