Racal SERIES 1250 Interface
Fabricant:
Modèle:
SERIES 1250
Date:
2002
Catégorie:
Groupe:
Description:
Universal Switch Controller

Information

The 1250 Universal Switch Controller allows signals to be switched in a single system from DC to 26.5GHz. The 1250 Series is a general purpose switching system designed for both manual and automatic test systems. Low level, power, R.F. and microwave switching requirements are addressed by the switch modules available in the 1250 Series. The 1250 is designed for use in automatic test systems, but local control of the switching system is supported by Option 90, which supplies an intelligent front panel with a display and keyboard. Refer to Figures 1-1 and 1-2 for illustrations of the 1250 front panel and Option 90, the intelligent front panel, respectively.

plus

Manuel de l'utilisateur
Type manuel:
Manuel de l'utilisateur
Pages:
218
Taille:
1.46 Mbytes (1530254 Bytes)
Langue:
english
Révision:
Manuel-ID:
980609
Date:
2002 03 21
Qualité:
Électronique de documents, numérisation sans, bien lisible.
Date de transfert:
2015 10 10
MD5:
5b098558435b0cc6175cb1ef4f3b1f54
Téléchargements:
627

Information

This manual provides the information necessary to install and operate the Racal-Dana Model 1250 Universal Switch Controller. Section two (Installation) provides the procedures necessary to unpack and inspect the 1250, install the intelligent front panel, install 1250 Series switch modules in the chassis and connect the 1250 to the GPIB. Section three (Operation) provides the command codes and keystrokes required in both local and remote control of the 1250.

plus