Philips PM3335 Oscilloscopes
Fabricant:
Image 1 de 1
Si vous avez d'autres photos ou manuels pour les
Philips PM3335 vous pouvez télécharger les fichiers ici .
Modèle:
PM3335
Date:
Catégorie:
Groupe:
Description:
60 MHz, 20 MS/s Digital Storage Oscilloscope
Information
PM 3335, 60 MHz, 20 MS/s Digital Storage Oscilloscope
Analog Oscilloscope plus full function Digital Storage Oscilloscope
20 MS/s synchronous real time sample rate on each channel
60 MHz analog bandwidth
Deep SK bytes x 8-bit waveform acquisition memory even at max sample rate
Second reference memory for comparison of waveforms
AUTOSET for instant on-screen trace display
Standard cursors for many on-screen measurements
GPIB/IEEE-488 and RS-232C Interface options
Two Scopes in One
Philips PM 3335 sets a standard in performance and economy. This instrument is two professional scopes in one: it operates as a real time 60 MHz analog Oscilloscope and at the touch of a button, becomes a full function digital Oscilloscope for advanced applications. Now, for the first time in a cost-effective scope, you have the power for digital capture and analysis of exclusive
single shots with a full 20 MS/s sample rate on each channel simultaneously. Unlike some scopes in this class, the full . sample rate is maintained for all channel combinations, giving a single event resolution of 50 ns for both channels.
Repetitive signal analysis is also posstble up to 60 MHz in analog Oscilloscope mode. A x10 expansion allows 5 ns sweep speeds for detailed viewing and furthermore, with the 100 MHz trigger bandwidth, you have a higher trigger sensitivity
over the full range.
Type manuel:
Fiche technique
Pages:
3
Taille:
1.18 Mbytes (1240889 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
1992
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2023 04 15
MD5:
0eb2d0969b482687e36dea55184c124f
Téléversé par:
AlanD
Téléchargements:
181
Information
This file has been processed by OCR, (down-scaled to 300dpi) so the text can be searched with Acrobat.
Thanks to AlanD
Type manuel:
manuel de réparation
Pages:
182
Taille:
28.92 Mbytes (30326876 Bytes)
Langue:
english
Révision:
Manuel-ID:
4822 872 05332
Date:
1989 04 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2023 04 15
MD5:
c552d74416d9ff3b86b9524712eac713
Téléversé par:
AlanD
Téléchargements:
248
Information
This file has been processed by OCR, (down-scaled to 300dpi) so the text can be searched with Acrobat.
Thanks to AlanD
Type manuel:
manuel de réparation
Pages:
182
Taille:
47.89 Mbytes (50216030 Bytes)
Langue:
english
Révision:
Manuel-ID:
4822 872 05332
Date:
1989 04 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2015 07 29
MD5:
ee4bc35d5a02836a7e568306f0813961
Téléchargements:
2548
Information
1. SAFETY INSTRUCTIONS
1.1 In t roduc t ion
1.3 Caution and warning statements ... 1-1
1.4 Symbols ... 1~1
1.5 Impaired safety-protection ... 1-2
1.6 General clauses ... 1-2
2. CHARACTERISTICS 2-1
2.1 Display ... 2-3
2.2 Vertical deflections or Y axis ... 2-3
2.3 Horizontal deflection or X axis ... 2-5
2.4 Triggering ... 2-6
2.5 Signal acquisition ... 2-7
2.6 Channels A and B ... 2-8
2.7 Time base ... 2-9
2.8 Trigger ... 2-9
2.9 Memory ... 2-10
2.10 Display ... 2-10
2.11 Calculation facilities ... 2-10
2.12 Auto setting ... 2-10
2.13 Cursors ... 2-11
2.14 Power supply ... 2-11
2.15 Sundries ... 2-12
2.16 Environmental characteristics ... 2-13
2.17 Safety ... 2-15
2.18 Optional versions ... 2-15
3. INTRODUCTION TO CIRCUIT DESCRIPTION AND BLOCK DIAGRAM
DESCRIPTION 3-1
3.1 Introduction to circuit description ... 3-1
3.2 Block diagram description ... 3-13
4. ATTENUATOR UNIT (Al) 4-1
4.1 Vertical attenuators ... 4-1
4.2 External input ... 4-2
5. PRE-AMPLIFIER UNIT (A2) 5-1
5.1 Vertical pre-amplifier ... 5-1
5.2 TB trigger pre-amplifier ... 5-2
5.3 Pre-amplifier control ... 5-3
6. XYZ-AMPLIFIER UNIT (A3) 6-1
6.1 Introduction ... 6-1
6.2 Final vertical (Y) Amplifier ... 6-1
6.3 Final horizontal (X) Amplifier ... 6-1
6.4 Final blanking (Z) Amplifier and CRT ... 6-2
7. TIME-BASE UNIT (A4) 7-1
7.1 Trigger Amplifier ... 7-1
7.2 Timing circuit ... 7-2
7.3 Sweep Generator ... 7-4
7.4 X DEFL Amplifier, and display mode switch ... 7-6
7.5 Z-amplifier ... 7-6
7.6 Timing diagram ... 7-7
7.7 Timing diagram ... 7-7
8. CRT Control Unit (A5) 8-1
5
9.1 Input circuit ... 9-1
9.2 Converter circuit ... 9-1
9.3 Secondary output rectifiers ... 9-3
9.4 HT supply ... 9-3
9.5 Calibrator ... 9-3
0. FRONT UNIT (A7-A8) 10-1
10.1 Key matrix and reset circuit ... * ... 10-1
10.2 Front panel controls, Probe indicator, auxiliary .. 10-1
10.3 LCD display circuit ... 10-2
1. DIGITAL UNIT (A9)
11.1 Input amplifiers and ADC circuit ... 11-1
11.2 Acquisition memories ... 11-1
11.3 Acquisition control logic ... 11-2
11.4 Display logic ... 11-4
11.5 DAC circuits ... 11-6
11.6 Display and time base control ... 11-7
11.7 CPU logic ... 11-8
11.8 Signal name list ... 11-10
2. ADAPTATION UNIT 12-1
12.1 Vertical display mode switch 12-1
12.2 Real time mode Amplifier 12-1
12.3 Digital memory Amplifier 12-2
12.4 Signal name list 12-2
13. PERFORMANCE CHECK 13-1
13.1 General information ... 13-1
13.2 Preliminary settings ... 13-2
13.3 Recommended test equipment ... 13-2
13.4 Checking procedure ... 13-2
14. DISMANTLING THE INSTRUMENT 14-1
14.1 General information ... 14-1
14.2 Removing the top and bottom covers ... 14-1
14.3 Access to parts for the checking and adjusting
procedures ... 14-1
15. ADJUSTING PROCEDURE 15-1
15.1 General information ... 15-1
15.2 Recommended test and calibration equipment ... 15-5
15.3 Survey of adjusting elements ... 15-6
15.4 Adjusting procedure ... 15-11
16. CORRECTIVE MAINTENANCE 16-1
16.1 Replacements ... 16-1
16.2 Removing the units and mechanical parts ... 16-3
16.3 Soldering techniques ... 16-9
16.4 Instrument repacking ... 16-9
16.5 Trouble shooting ... 16-10
16.6 Special tools ... 16-12
16.7 Recalibration after repair ... 16-13
17. SAFETY INSPECTION AND TEST AFTER REPAIR AND MAINTENANCE IN
THE PRIMARY CIRCUIT 17-1
17.1 General directives ... 17-1
17.2 Safety components ... 17-1
17.3 Checking the protective earth connection ... 17-1
17.A Checking the insulation resistance ... 17-1
17.5 Checking the leakage current ... 17-1
17.6 Voltage test ... 17-2
18. PARTS LIST 16-1
18.1 Mechanical parts ... 18-1
18.2 Cables and connectors ... 18-4
18.3 Electrical parts ... 18-6