Anritsu MH680B Générateur
Fabricant:
Pas d'image disponible!
Peut-être que vous pouvez envoyer une image pour le
Anritsu MH680B ?
Si vous avez d'autres manuels pour les
Anritsu MH680B, vous pouvez télécharger les fichiers ici .
Modèle:
MH680B
Date:
1985
Catégorie:
Groupe:
Description:
Tracking Generator
Information
The MH680B Tracking Generator is used in conjunction with
the MS61 OB Spectrum Analyzer as a wideband sweep signal
Generator which measures amplitude vs. frequency response by
direct observation. The output frequency of the MH680B when
used with the MS610B can be set in the range from 100 kHz to
2 GHz by using the MS61OB frequency dial.
The output level of the MH680B can be varied continuously in
the range from -10 to 0 dBm.
The MH680B
with the MS610B
can be used to measure the
frequency response of filters, amplifiers, and attenuators.
The device under measurement can be adjusted while directly
observing the characteristics on the MS610B CRT display.
Also the MH680B with the MS610B and a frequency Counter, can
be used to measure the accurate frequency and frequency
response.
Impedance can be measured by direct observation using a
directional coupler or a reflection bridge.
Type manuel:
Service et Manuel de l'utilisateur
Pages:
74
Taille:
1.28 Mbytes (1339609 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2014 05 02
MD5:
db6e193c7581c4b5701f893c381d513a
Téléchargements:
1006
Information
SECTION 1 GENERAL
... 1-1
SECTION 2 COMPONENTS AND SPECIFICATIONS
... 2-1
2.1 Components
... 2-1
2.2 Specifications
... 2-1
SECTION 3 OPERATION .
... 3-1
3.1 Precautions
... 3-1
3.1.1 Power supply
... 3-1
3.1.2 Environmental conditions of
installation site
... 3-2
3.1.3 Maximum input level
... 3-2
3.2 Explanation of Controls
... 3-3
3.3 Measurement
... 3-5
3.3.1 Measurement Preparations
... 3-5
3.3.2 Measurement Precautions
... 3-8
3.3.3 Measurement
... 3-10
(1) Amplifier measurement
... 3-10
(2) Measurement with improved
frequency accuracy
... 3-11
(3) Filter measurement
... 3-16
(4) Impedance measurement
... 3-19
SECTION 4 PRINCIPLES OF OPERATION ... • 4-1
SECTION 5 PERFORMANCE TEST
5.1 Introduction
... 5-1
5.2 Equipment Required for Performance Test ... 5-2
5.3 Preliminary Operations
... 5-2
5.4 Performance Test
... 5-2
5.4.1 Frequency range
... 5-3
5.4.2 Output level range
... 5-4
5.4.3 Output level flatness
... 5-5
5.4.4 ower consumption
... 5-6
SECTION 6 CIRCUIT DIAGRAM
... 6-1
SECTION 7 REPLACEABLE PARTS
7.1 Introduction
... 7-1
7.2 Ordering Information
... 7-1
7.3 Reading Capacitance/Resistance ... 7-4
7.4 Semiconductor Markings
... 7-6
7.5 Parts List
... 7-7