Tektronix - P6475 - TV pattern generator
Fabricant:
Pas d’image disponible!
Peut-être que vous le pouvez
Télécharger une photo
pour l'
TektronixP6475 ?
Si vous avez d'autres manuels pour le
Tektronix P6475
vous pouvez
télécharger les fichiers ici.
.
Matériels:
P6475
Date:
Catégorie:
Groupe:
Sous-groupe:
Information
Product Description
The pattern Generator Probe provide multichannel signals to simulate signals in a test environment.
Following are descriptions of the Probe discussed in this manual P6470 TTL/CMOS
The P6470 provides TTL or CMOS signals to the target system and contains 16
data outputs, 1 Clock output, and 1 strobe output. The Vcc output driver is
adjustable from 2.0 V to 5.5 V. Figure 14 on page 18 shows the P6470 input/output circuit.
The P6470 Probe comes standard with 75 Ω termination resistors packs. You can change the resistor packs to provide impedance matching for the target system.
Refer to Removing the Probe Cover on page 46 and Changing the Series
Termination Resistors on page 47 P6471 ECL
The P6471 ECL pattern Generator Probe provides ECL signals to the target
system and contains 16 data outputs, 1 Clock output, and 1 strobe output. Figure 15 on page 19 shows the P6471 input/output circuit P6472 PECL/LVPECL
The P6472 provides PECL/LVPECL signals to the target system and contains 8
data outputs, 1 Clock output, and 1 strobe output. You can select PECL or
LVPECL by moving a jumper in the Probe ee Configuring the P6472 for
PECL or LVPECL on page 48. Figure 16 on page 20 shows the P6472 input/out-
put circuit P6473 LVDS
The P6473 provides LVDS signals to the target system and contains 16 data
outputs, 1 Clock output, and 1 strobe output. All inputs and outputs are LVDS
level P6474 LVCMOS
The P6474 provides LVCMOS signals to the target system and contains 16 data outputs, 1 Clock output and 1 strobe output. Figure 18 on page 22 shows the P6474 input/output circuit.
The Vcc of the output driver is adjustable from 1.2 V to 3.3 V.
1 Manuel
Manuel utilisateur
Type manuel:
Manuel utilisateur
Pages:
65
Taille:
363,8 Kio
Langue:
anglais
Révision:
Manuel-ID:
071-1017-01
Date:
Qualité:
Document électronique, pas de scan, très bien lisible.
Date de téléchargement:
23 septembre 2019
MD5:
c5c7de9c-89e8-46f4-1c1d-04e2f51fa1f4
Information
This document supports Tektronix Logic Analyzer Family Software Version 4.1 and Tektronix Pattern Generator oftware Version 1.3 and above.
General Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contacting Tektronix Product Description Probe Lead Sets and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the Standard Probe Connecting the P6475 Probe Probe Connectors and Signal Names Probe Overview Probe Dimensions P6475 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input/Output Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timing Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Static Discharge Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring Probe Repackaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Téléchargements:
2315
Téléchargements du mois dernier:
35
Télécharger
tektronix--p6475--user--ID12105.pdf