Tektronix TDS 380 Osciloscopio
Fabricante:
Modelo:
TDS 380
Fecha:
0
Categoría:
Grupo:
Descripción:
Digital Real-Time Oscilloscope

Información

Tektronix TDS 340A TDS 360 and TDS 380 oscilloscopes are digital signal processors and are superb tools for displaying and measuring waveforms. Their performance addresses the needs of both benchtop lab and portable applications with the following features: Two input channels, each with a record length of 1,000 samples and 8-bit vertical resolution. Both channels acquire waveforms simultaneously. 2 Gigasample/second maximum sample rate (TDS 380,; 1 Gigasamples/ second maximum sample rate (TDS 360,; 500 Megasamples/second maximum sample rate (TDS 340A,. 400 MHz analog bandwidth and fastest time base setting of 1 ns/div (TDS 380,; 200 MHz analog bandwidth and fastest time base setting of 2.5 ns/div (TDS 360,; 100 MHz analog bandwidth and fastest time base setting of 5 ns/div (TDS 340A,. A full complement of advanced functions including on-screen readout, AUTOSET, cursors, continuously updated automatic measurements, and FFT. Waveform averaging, waveform enveloping, and hardware peak detection. Floppy disk drive for mass storage of waveforms, setups, and hard copies. A unique graphical user Interface (GUI) and a logical front-panel layout which combine to deliver the standard in usability pioneered by the TDS family of oscilloscopes.

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
266
Tamaño:
950.09 Kbytes (972897 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
070-9442-02
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2011 06 18
MD5:
0c923f309bbe98b5996836206ce95c94
Descargas:
2682

Información

Programmer Manual

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
164
Tamaño:
1.15 Mbytes (1205444 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
070-9459-04
Fecha:
1995 01 01
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2017 12 27
MD5:
33c5824573681a0989657bd14e4566ed
Descargas:
1507

Información

This manual provides user information for the TDS 300 Two-Channel Digital Real-Time Oscilloscopes. The manual contains the following chapters and appendices: Getting Started contains a brief product description; information needed to power on the Oscilloscope, and a brief procedure to verify that it functions. Operating Basics contains user Interface, Probe, and autoset information. Reference contains task-oriented descriptions of Oscilloscope features. The features are described in order from most basic to more specialized. Appendix A: Specifications contains typical, nominal, and warranted specifications for the Oscilloscope. Appendix B: Performance Verification contains procedures you can use to verify that Oscilloscope is operating within warranted specifications. Appendix C: Options and Accessories describes other products that are useful with the Oscilloscope. Appendix D: General Care and Cleaning describes how to care for and clean the Oscilloscope. Glossary contains a glossary of terms. Index contains a full index.

ver más

Manual de servicio
Type manuel:
Manual de servicio
Páginas:
152
Tamaño:
1.59 Mbytes (1666753 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2013 04 25
MD5:
51bbf57c643b7e1ad464ce8f8125de3a
Descargas:
2419

Información

This service manual provides service information for the TDS 340A TDS 360 and TDS 380 Digitizing Oscilloscopes. This manual is divided into Chapters such as Specifications and Theory of Operation. Further, it is divided into subsections such as Product Description and Removal and Installation Procedures. Sections containing procedures also contain introductions to those procedures. Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following is a brief description of each manual chapter.  Specifications contains a product description of the digitizing Oscilloscope and tables of the characteristics and descriptions that apply to it.  Operating Information includes general information and operating instructions at the level needed to safely power on and service this Oscilloscope.  Theory of Operation contains circuit descriptions that support general service and fault isolation down to the module level.  Performance Verification contains a collection of procedures for confirming that this digitizing Oscilloscope functions properly and meets warranted limits.  Adjustment Procedures contains a collection of procedures for adjusting this digitizing Oscilloscope to meet warranted limits.  Maintenance contains information and procedures for doing preventive and corrective maintenance of the digitizing Oscilloscope. Instructions for cleaning, for module removal and installation, and for fault isolation to a module are found here.  Options contains information on the factory-installed options that may be present in your Oscilloscope.  Electrical Parts List contains a statement referring you to the Mechanical Parts List, where both electrical and mechanical modules are listed.  Diagrams contains a statement referring you to the Theory of Operation Chapter, where module-level block diagrams are listed.  Mechanical Parts List includes a table of all replaceable modules, their descriptions, and their Tektronix part numbers.

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
288
Tamaño:
3.81 Mbytes (3991006 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
070-9436-04
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2017 12 27
MD5:
c622904913262cff8434086f6ce08ff8
Descargas:
1716

Información

Technical Reference This technical reference manual provides service information for the TDS 340A TDS 360, and TDS 380 Digitizing Oscilloscopes. This manual is divided into Chapters such as Specifications and Theory of Operation. Further, it is divided into subsections such as Product Description and Removal and Installation Procedures. Sections containing procedures also contain introductions to those procedures. Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following is a brief description of each manual chapter. Specifications contains a product description of the digitizing Oscilloscope and tables of the characteristics and descriptions that apply to it. Operating Information includes general information and operating instruc- tions at the level needed to safely power on and service this Oscilloscope. Theory of Operation contains circuit descriptions that support general service and fault isolation down to the module level. Performance Verification contains a collection of procedures for confirming that this digitizing Oscilloscope functions properly and meets warranted limits. Adjustment Procedures contains a collection of procedures for adjusting this digitizing Oscilloscope to meet warranted limits. Maintenance contains information and procedures for doing preventive and corrective maintenance of the digitizing Oscilloscope. Instructions for cleaning, for module removal and installation, and for fault isolation to a module are found here. Options contains information on the factory-installed options that may be present in your Oscilloscope. Electrical Parts List contains a component-level list grouped by board assembly.

ver más