Marconi TF 2600 Multímetro analógico
Fabricante:
Imagen 1 de 5
Imagen 2 de 5 uploaded by: Harald Gyo
Imagen 3 de 5 uploaded by: Harald Gyo
Imagen 4 de 5 uploaded by: Harald Gyo
Imagen 5 de 5 uploaded by: Harald Gyo
Si tienes otras fotos o manuales para el
Marconi TF 2600 puedes subir los archivos aquí .
Modelo:
TF 2600
Fecha:
Categoría:
Grupo:
Descripción:
AC Voltmeter
Información
INTRODUCTION
The TF 2600 is a wide-range a.c. voltmeter of high sensitivity and stability; 12
ranges, giving full-scale deflections from 1 mV to 300 V, enable voltages down
to the order of 100 to be measured.
An amplifier-rectifier type instrument, it maintains good accuracy with
moderately distorted waveforms. A cathode follower input stage, with
associated attenuators, regulates the signal level to a four-valve Amplifier,,
the output of which energizes a moving coil meter via a full-wave crystal
rectifier.
The meter is calibrated in terms of the r,m* s* value of a sinewave, but
responds to the average value; it is also calibrated in decibels relative to 1
mW in 600ft, giving a range of -72 to +52 dBm.
The output of the Amplifier section is made available at a pair of f ront-panel
terminals. This provides a pre-amplifier facility, having a response similar to
that of the instrument as a whole, with an output of up to 300 mV on any
range.
Type manuel:
Servicio y Manual del usuario
Páginas:
9
Tamaño:
349.71 Kbytes (358104 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2018 12 23
MD5:
aa9a4a7524f7327e8b863c76e9606a80
Descargas:
550