LeCroy ZS1500 Sonda
Fabricante:
Modelo:
ZS1500
Fecha:
2007
Categoría:
Grupo:
Descripción:
high impedance active probe

Información

PRODUCT DESCRIPTION The 1.5 GHz ZS1500 is a small, high impedance active Probe designed to meet today’s increasing demand for measurements on a variety of test points. With low input capacitance and high input resistance, circuit loading is minimized. The ZS1500 can be used with LeCroy’s WaveSurfer, Waverunner WaveMaster, and WavePro series platforms with firmware version 4.9.3 or later. With the ProBus Interface, the ZS1500 becomes an integral part of the oscilloscope. The Probe can be controlled from the oscilloscope’s front panel. The Oscilloscope provides power to the Probe, so there is no need for a separate Power supply or batteries. KEY BENEFITS • High frequency performance • Low input capacitance • Wide dynamic range • ProBus Interface • Four interchangeable tips for probing a variety of test points (one standard, three optional accessories)

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
52
Tamaño:
829.15 Kbytes (849046 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
2007 02 01
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2021 01 05
MD5:
fca4b963780d50fcc0653217f5f7fbb9
Descargas:
215

Información

Safety Information Operator Safety ... 1-1 Conventions Used in this Manual ... 1-1 Overview Product Description ... 2-1 Key Benefits ... 2-1 Standard Accessories ... 2-2 Optional Accessories ... 2-2 Features and Accessories Probe Head ... 3-1 Description of Standard and Optional Accessories ... 3-1 A. Tips ... 3-1 B. Grounds ... 3-3 C. Leads ... 3-6 Operation Handling the Probe ... 4-1 Connecting the Probe to the Test Instrument ... 4-1 Connecting the Probe to the Test Circuit ... 4-1 Operation with a LeCroy Oscilloscope ... 4-1 High Frequency Measurements Input Loading ... 5-1 Inductive Loading (Lead Length) ... 5-1 Capacitive Loading ... 5-2 Care and Maintenance Cleaning ... 6-1 Calibration Interval ... 6-1 Service Strategy ... 6-1 Returning a Defective Probe ... 6-1 Replacement Parts ... 6-2 Performance Verification Test Equipment Required ... 7-1 Preliminary Procedure ... 7-2 Functional Check ... 7-3 Procedure ... 7-4 A. Output Zero Voltage ... 7-4 B. Offset Accuracy ... 7-4 C. LF Attenuation Accuracy ... 7-7 Adjustment Procedure Introduction ... 8-1 Test Equipment Required ... 8-1 Preliminary Procedure ... 8-2 Procedure ... 8-3 A. Adjust Output Zero ... 8-3 B. Adjust Offset Range ... 8-4 C. Verify Calibration ... 8-6 Specifications Nominal Characteristics ... 9-1 Warranted Characteristics ... 9-1 Typical Characteristics ... 9-1 Environmental Characteristics ... 9-2 Physical Characteristics ... 9-2 Compliance and Certifications ... 9-3 Appendix A Performance Verification Test Record ... A-1 Equipment Used: ... A-1 ZS1500 Test Record ... A-2

ver más