JBL SR6670A Amplificador
Fabricante:
Modelo:
SR6670A
Fecha:
1991
Categoría:
Grupo:
Descripción:
Power Amplifier

Información

Features: The two rack-space, JBL 6670A is an all solid-state power Amplifier capable of delivering up to 600 watts per channel into 4 Ohms with both channels driven, with independent protection circuitry on each channel. It has a switching Power Supply, and is available in one 110/120 Volt version. A choice of optional signal processing boards may be installed to provide either a Peak Compressor with High Pass Filter or an Electronic Crossover for Bi-amp operation. Parallel XLR and V*" phone connectors feed fully active bridging differentially balanced circuitry. A rear- panel switch selects between three modes of operation: Stereo, Dual Mono (single input to both channels) and Bridge Mono output. Neutrik Speakon® connectors supply Left, Right and Auxiliary (Stereo, Bridge or Bi-amp) Speaker outputs. The chassis has both front and rear rack mounting brackets. Dual variable-speed fans draw filtered cooling air through rear vents, exhausting through front grilles.

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
96
Tamaño:
15.95 Mbytes (16724191 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
1991 01 01
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2017 10 29
MD5:
c96bee13092a455545882432b4f9addc
Descargas:
737

Información

Introduction ... 4 Contents of Shipping Container ... 4 Front Panel ... 5 Rear Panel ... 6 Amplifier Mode Switch ... 6 Stereo: ... 6 Dual Mono: ... 6 Bridge Mono: ... 7 ... 7 Signal Processing Options: Peak Compressor and High Pass Filter ... 7 Electronic Crossover ... Rack Mounting ... 8 Grounding ... 9 Safety ... 9 Recommended Practices ... 10 Unbalanced Sources ... 11 Input Connections ... 12 Output Connections ... 13 Speakon® Connector Wiring ... 14 Turn On Procedure ... 15 Troubleshooting ... 16 Specifications ... 19 Maintenance ... 21 Warranty ... 22

ver más