Hewlett Packard 414A Multímetro analógico
Fabricante:
Imagen 1 de 2 uploaded by: Christiaan Wagner
Imagen 2 de 2
Si tienes otras fotos o manuales para el
Hewlett Packard 414A puedes subir los archivos aquí .
Modelo:
414A
Fecha:
1966
Categoría:
Grupo:
Descripción:
Autovoltmeter
Información
The Model 414A Autovoltmeter is used to accurately measure
dc volts and ohms with immediate, automatic range selection.
Operation is simply "touch and read." Automatic, overload
protection circuits insure that the instrument will not be
damaged by an overrange voltage before upranging can occur.
Both range and polarity are displayed in illuminated
characters above the meter.
In the AUTO mode, a downrange to the next lowest range
occurs when the measured voltage or resistance falls below
25% of full scale; and an uprange to the next highest range
occurs when the measured voltage or resistance rises above
96% of full scale.
A HOLD mode provides manual downranging, a step at a time,
using the DOWNRANGE switch and also adds a noise Filter to
the input. When measuring voltage in this mode, an automatic
uprange to the
1500 v range will occur if the measured voltage exceeds full
scale by 40%. On resistance measurements in the HOLD mode,
upranging will never occur, even when the measured
resistance becomes infinite, such as when the probes are
removed from a resistor.
Type manuel:
Servicio y Manual del usuario
Páginas:
69
Tamaño:
24.07 Mbytes (25238222 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
01789-1
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2013 11 30
MD5:
9b55fee88708f7a5f2a6f246b9d2babd
Descargas:
776
Información
SERIALS PREFIXED: 630-
Appendix C, Manual Backdating Changes, adapts manual to
Serials Prefixed: 605- and 531-.