Información del equipo:

Hewlett Packard 1631D Logic Analyzer
Hewlett Packard
Modelo: 1631D
Fecha: 1986
Categoría: Los instrumentos de medición
Grupo: Logic Analyzer
                                    The Hewlett-Packard 1630 and 1631 Logic Analyzers are
Interactive state and timing analyzers for use in the design
and troubleshooting of digital systems. Many functions of
the systems are the same. The HP 1630A and 1631A have 27
state channels with three clocks and 8 timing channels. The
HP 1630D and 1631D have an additional 8 timing channels. The
HP 1630G has an additional 30 state channels. The HP 1631A
and 1631D have two analog signal channels and an analog
trigger channel. All models feature a menu system for
defining measurements which simplifies setup time by
reducing the number and complexity of front panel keys.
Following is a listing of the key features of the HP 163X

Estos manuales están disponibles para el equipo anterior:

Tipo de manual: Manual de servicio HewlettPackard-4949-Manual-Page-1-Picture
Páginas: 507
Tamaño: 26.56 Mbytes (27851423 Bytes)
Idioma Inglés
Manual-/ número de identificación: 01630-90916
Fecha: abril 1988
Calidad: Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de carga:
MD5: 834a98d43bd9e8e81cb1933c627a1e35
Descargas: 706 desde 01 diciembre 2013
This manual applies directly to instruments with serial
numbers prefixed:
1630A;2812A 1630D;2812A 1630G;2812A 1631 A; 2811A 1631D; 2811A
With changes described within, this manual also applies to
instruments with serial prefixes:

1630A; 2242A through 2715A 1630D; 2234A through 2720A 1630G;
2415A through 2602A 1631 A; 2451A through 2714A 1631D; 2446A
through 2713A

SECTION I, GENERAL INFORMATION. This section contains a
description of this manual and the HP 163X logic Analyzer
family. This section also gives specifications and
recommended test equipment for the logic analyzers.

SECTION II, INSTALLATION. Section II explains how to prepare
the Logic Analyzers for use.

SECTION III, OPERATION. Operation of the HP 1630A/D/G and HP
1631 A/D is outside the scope of this service manual.
Section III does give a brief description of front panel
controls and information about configuration of the logic
analyzers for IHP-IB and HP-IL operation. For complete
operating instructions see the Operating Manual.

SECTION IV, CONFIDENCE TESTS. This section concerns the
execution of software-based function verification Self Test
(ST) tests, which includes the interpretation of status
codes to verify correct operation.

SECTION V, ADJUSTMENTS. The logic analyzers require several
adjustments that can be done with an Oscilloscope,
voltmeter, programmable signal source and controller; these
adjustments are covered this section.

SECTION VI, REPLACEABLE PARTS. This section contains
ordering information and a parts list for all models of the

information which describes changes to the instruments and
how to find proper documentation for the instrument being

SECTION VIII, SERVICE. The Service section is divided into
eight subsections. The first subsection covers the overall
system. This includes system theory, and which service group
to reference with a failure. The service groups focus on
individual subsystems. Information in these groups includes
block and component level theory, mnemonics, and schematics
relating to that subsystem.

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics