Hewlett Packard 3478A Multímetro digital
Fabricante:
Imagen 1 de 4
Imagen 2 de 4
Imagen 3 de 4
Imagen 4 de 4
Si tienes otras fotos o manuales para el
Hewlett Packard 3478A puedes subir los archivos aquí .
Modelo:
3478A
Fecha:
1981
Categoría:
Grupo:
Descripción:
Información
Your new 3478A is a fully programmable HP-IB* digital
multimeter.
In an automatic test or on the bench, the 3478A offers 3 1/2
to 5 1/2 digit resolution for measuring dc volts, true RMS
ac volts, 2- and 4- wire ohms, and dc and RMS ac current.
The 3478A offers dc voltage performance from 100 nanovolt
sensitivity up to 300 volts (full scale), true RMS
capability up to 300 kHz, and resistance measurements from
100µΩ sensitivity to 30MΩ (full scale). Its dc and true RMS
ac current measuring capability is from 1µA sensitivity up
to 3A. The fast autorange capability of the 3478A allows you
to make measurements over a wide dynamic range without
sacrificing throughput rates.
By selecting the number of digits displayed and using the
autozero feature, the 3478A allows you flexibility in
measurement speed and accuracy. Up to 71 readings per
second can be made with the 3478A in the 3 1/2 digit mode.
The 3478A has a fast trigger mode which lets you bypass the
built-in settling time delay to make fast true RMS ac
measurements in systems applications.
Type manuel:
Manual de servicio
Páginas:
161
Tamaño:
10.49 Mbytes (11000673 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
03478-90008
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2013 11 20
MD5:
16780e340aa5741bfd8478260c17b1ff
Descargas:
1419
Información
Serials 2619A37795 and above
1-2. The information in this manual is for the Installation,
Operation, Performance, Calibration, and Service of the
3478A Digital multimeter. The manual is designed for the
use of Service Trained Personnel. Other users should refer
to the Operators Manual. This manual is separated into the
following sections.
1-3. Section I, General Information
1-4. A short description of the manual and introduction to
the 3478A is in Section I. The section also lists instrument
options, specifications, and Accessories.
1-5. Section II, Installation Procedures
1-6. This section explains how the 3478A is prepared for use
and includes power requirements, line voltage selection, etc.
The section also explains how to connect the multimeter for
remote operation.
1-7. Section III, Operation
1-8. The condensed operating instructions of the 3478A
for the
use of Service Trained Personnel, is in this section. For more
complete instructions, refer to the Operators Manual.
1-9. Section IV, Performance Test and Calibration
1-10. The 3478A’s Performance Test and Calibration Procedures
are in Section IV. The Required Equipment Table and an
abbreviated specification table are also included.
1-11. Section V, Replaceable Parts
1-12. Section V lists the replaceable parts of the 3478A,
It also includes pictures and illustrations of chassis
and mechanical parts.
1-13. Section VI, Backdating
1-14. This section has information which adapts this manual
to 3478A’s with serial numbers below the ones shown on the
title page.
1-15. Section VII, Service
1-16. The 3478A’s Troubleshooting Procedures, Theory Of Operation,
and Schematics are in Section VII. The troubleshooting
information is in the form of Service Groups which are symptoms
oriented (i.e., what is the failure). The complete theory of
operation is in Service Group F and the Schematics are
in Service Group G (last group).
1-17. Appendix A
1-18. The appendix has a condensed description of the HP-IB (Hewlett-Packard Interface Bus).
Type manuel:
Manual del usuario
Páginas:
104
Tamaño:
19.44 Mbytes (20383823 Bytes)
Idioma:
english
Revisión:
2
Manuel-ID:
03478-90009
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2013 11 20
MD5:
2116b702500310f1ca6de39ea49a81cc
Descargas:
989
Type manuel:
Manual del usuario
Páginas:
107
Tamaño:
4.03 Mbytes (4229650 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
03478-90055
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2013 11 19
MD5:
317d046d640bfe2768a772c7e2ab9437
Descargas:
1071
Type manuel:
Manual de servicio
Páginas:
175
Tamaño:
11.46 Mbytes (12021104 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
03478-90006
Fecha:
1984 01 01
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2017 12 31
MD5:
e3bbdd16ea66e4ffc224f66b6152efff
Descargas:
974
Información
1-1. INTRODUCTION
1-2. The information in this manual is for the Installation,
Operation, Performance, Calibration, and Service of the
3478A Digital multimeter. The manual is designed for the use
of Service Trained Personnel. Other users should refer to
the Operators Manual. This manual is separated into the
following sections.
1-3. Section I, General Information
1-4. A short description of the manual and introduction to
the 3478A is in Section I. The section also lists instrument
options, specifications, and Accessories.
1-5. Section II, Installation Procedures
1-6. This section explains how the 3478A is prepared for use
and includes power requirements, line voltage selection,
etc. The section also explains how to connect the multimeter
for remote operation.
1-7. Section III, Operation
1-8. The condensed operating instructions of the 3478A
for
the use of Service Trained Personnel, is in this section.
For more complete instructions, refer to the Operators Manual.
1-9. Section IV, Performance Test and Calibration
1-10. The 3478A’s Performance Test and Calibration
Procedures are in Section IV. The Required Equipment Table
and an abbreviated specification table are also included.
1-11. Section V, Replaceable Parts
1-12. Section V lists the replaceable parts of the 3478A, It
also includes pictures and illustrations of chassis and
mechanical parts.
1-13. Section VI, Backdating
1-14. This section has information which adapts this manual
to 3478A’s with serial numbers below the ones shown on the
title page.
1-15. Section VII, Service
1-16. The 3478A’s Troubleshooting Procedures, Theory Of
Operation, and Schematics are in Section VII. The
troubleshooting information is in the form of Service Groups
which are symptoms oriented (i.e., what is the failure). The
complete theory of operation is in Service Group F and the
Schematics are in Service Group G (last group).
1-17. Appendix A
1-18. The appendix has a condensed description of the HP-IB
(Hewlett-Packard Interface Bus).