Emco 1060-1.5m Test Set
Fabricante:
No hay fotos disponibles!
Tal vez puedas subir por foto para el
Emco 1060-1.5m ?
Si tienes otros manuales para el
Emco 1060-1.5m puedes subir los archivos aquí .
Modelo:
1060-1.5m
Fecha:
Categoría:
Grupo:
Descripción:
Equipment Testing Turntabl
Información
SYSTEM DESCRIPTION
The Emco Equipment Testing Turntable is designed for use in
compliance testing.
Rotation is provided by a drive system which includes an
electric motor, electric brake and a drive gear reduction
arrangement. Approximately 370 degrees of rotation are
provided before travel is stopped by mechanically actuated
limit switches, which are preset at the factory.
The base of the turntable is constructed of marine grade
plywood, the platform is fabricated of either marine grade
plywood covered with formica or solid 3/8" steel plate,
depending on the model chosen. Both platforms are designed
to provide strength and rigidity and resist degradation due
to harsh environments. The drive unit is attached to the
base section, as is the phenolic support and the stationary
member of the center bearing.
In addition to mechanical limits, the controller has the
capability to move the table a full 370 degrees of rotation
as well as any smaller arc of the circle. For further
explanation of controller functions and programming, see the
manual section entitled "Controller Operation and Programming".
Type manuel:
Servicio y Manual del usuario
Páginas:
30
Tamaño:
990.42 Kbytes (1014187 Bytes)
Idioma:
english
Revisión:
7
Manuel-ID:
399011
Fecha:
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2017 12 23
MD5:
43c2fcd0a1ff537b5b3c339c07f6c791
Descargas:
1133