Tektronix 308 Analyzer
Fabricante:
No hay fotos disponibles!
Tal vez puedas subir por foto para el
Tektronix 308 ?
Si tienes otros manuales para el
Tektronix 308 puedes subir los archivos aquí .
Modelo:
308
Fecha:
1980
Categoría:
Grupo:
Descripción:
Data Analyzer
Información
The Sony/Tektronix 308 Is a keyboard-controlled,
multifunctional, portable data Analyzer, intended to meet
the need for a portable and inexpensive service aid. The 308
can also be used as a digital design instrument and as a
production-line checkout tool for in-circutt tests. Four
modes of operation provide the user with a variety of
data-analyzing methods. This instrument can be used for
timing analysis of parallel signals, state analysis of
parallel signals, state analysis of serial transmissions
(including data communications), and signature analysis.
MODES OF OPERATION
Parallel Timing Analyzer Function
When used as a Parallel Timing Analyzer, the 308 provides an
eight-channel input, a 20 MHz clock speed, and 252
bits/channel memory size. The eight-channel
parallel word recognizer triggers upon recognition of a
preset digital word. This word-recognition capability is
expandable to 24 channels with an accessory word recognizer
probe. If no preset data is specified, the 308 Software
immediately generates an internal trigger at the start of an
acquisition. The digital delay counts up to 65,535 clocks.
Data sampled before or after the delayed trigger can be
stored either at sample intervals ranging from 50 ns to 200
ms or synchronously with an external clock. The latch input
allows the 308 to capture glitches narrower than the sample
interval. Stored data is displayed on the crt in digitized
timing format representing the HI and LO levels of the
stored data, but not the actual waveform.
Parallel State Analyzer Function
The Parallel State Analyzer function is identical to the
Parallel Timing Analyzer function except for the display.
Data is displayed in binary, octal, and hexadecimal formats.
Serial State Analyzer Function
When operated as a Serial State Analyzer, the 308 receives
serial data which conformsto EIASTD RS-232-C. Data of five,
six, seven, or eight bits per character may be inputted
using either synchronous or asynchronous timing. A
two-character word recognizer provides internal triggering
upon recognition of a preset digital word. The digital delay
counts up to 65,535 words. Data sampled before or after the
delayed trigger can be stored, using an internal clock, at
baud rates of 50 Hzto9.6 kHz or using an external clock.
Stored data is displayed on the crt readout in binary,
hexadecimal, and ASCII formats.
USING THE 308
The 308 is a versatile service and design aid that features
simplicity of operation while being adaptable to a wide
variety of applications. Qualified personnel can first
establish the proper setup for a particular application
(e.g., trigger data, display mode, and entry format).
Operators can then use the instrument to make routine
in-circuit tests. Illustrations contained in this manual may
also be helpful as guides. There are many variables at the
operator's control that affect the mode, timing, comparison
of previously-acquired data with new data, and other
subfunctions. These are easily selected if needed.
Several examples that may be adapted to your particular
needs are shown in this manual. These are but a few; many
more uses will be found with continued utilization of the 308.
Type manuel:
Manual del usuario
Páginas:
120
Tamaño:
2.83 Mbytes (2969476 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
1980 01 01
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2017 04 23
MD5:
78a6337723d76fa58c65e28e9369bd13
Descargas:
532
Información
LIST OF ILLUSTRATIONS ... ii
LIST OF TABLES ... iv
OPERATOR'S SAFETY SUMMARY ... v
GENERAL INFORMATION INTRODUCTION
DESCRIPTION ... 1
MODES OF OPERATION ... 1
ACCESSORIES ... 2
OPERATING INSTRUCTIONS INSTALLATION
POWER REQUIREMENTS ... 3
POWER CORD ... 3
Probe CONNECTION ... 4
CONTROLS, CONNECTORS AND INDICATORS
ACQUISITION CONTROLS ... 9
INSTRUMENT AND DISPLAY MODE
CONTROLS ... 12
ENTRY CONTROLS ... 14
SIGNATURE CONTROLS ... 16
INPUT CONTROLS AND CONNECTORS ... 16
OPERATORS CHECKOUT PROCEDURE ... 24
DIAGNOSTICS ... 24
OPERATORS FAMILIARIZATION
POWERING UP THE 308 ... 34
THE CONTROL FUNCTION ACCESS
CHART ... 34
THE NEXT STATE TABLE ... 34
BASIC OPERATING INFORMATION ... 37
DATA ACQUISITION ... 51
DISPLAYING DATA ... 71
APPLICATION EXAMPLE INTRODUCTION
SIGNATURE VERIFICATION ... 76
PARALLEL AND SERIAL DATA ACQUISITION
... 79
SPECIFICATION ... 83
ACCESSORIES ... 107
APPENDIX A ... 108
NOTES
CHANGE INFORMATION