Información del equipo:

Telecom Analysis Systems Inc. TAS Gemini 1022 Otro
Telecom Analysis Systems Inc.
Modelo: TAS Gemini 1022
Fecha: 1990
Categoría: Los instrumentos de medición
Grupo: Otro
Descripción: Dual Terminal Emulator
                                    The TAS Gemini 1022 Duaf Terminal Emulator is a dual data
Analyzer that is especially suited for testing and
evaluating modems and modem communication links. Gemini
effectively tests and evaluates the performance of analog
modems, iimited-distance modems (LDMs), Digital Dataphone
Service (DDS) sets, ISDN terminal adaptors, data
multiplexers, Vid more. Gemini combines the features
required for thorough testing into one compact unit. By
combining these features, Gemini dramatically reduces the
cost and complexity of data communications equipment test
Gemini Features
Two Data Analyzers fn One
Gemini contains two complete data communications analyzers
in one compact package. This makes it easy to perform
end-to-end tests on modems, DDS sets, limited distance
modems, ISDN terminals, multiplexers, and other data
communications equipment. Gemini’s terminal emulation, data
monitor, and performance testing features operate at rates
from 0 to 72 kbps and up to 76.8 kbps with an external clock.
Advanced Performance Tests
Gemini provides built-in performance testing capabilities,
including bit error rate tests, throughput tests, and
polling tests.
Built-In Call Setup
Gemini can store and execute call setup instructions for
virtually any modem.
Call setup data formats include async, sync, and hdlc.
Characters can be coded in ASCII or EBCDIC. Gemini can also
monitor and display the data flow to and from each modem.
Gemini provides complete testing capability, and eliminates
the additional terminals, protocol analyzers, and switching
equipment previously required for modem test setups.
Remote Control
RS-232 and IEEE-488 (GPIB) control are standard with Gemini.
Remote control commands are simple and easy to use, and are
the same regardless of the remote control method. This makes
it easy to include Gemini in automatic modem test systems.

RS-232/GPIB Command Translator
Gemini can act as the GPIB controiier in an automatic test
system. The controller issues commands to Gemini via RS-232,
and Gemini controls the rest of the test station via GPIB.
This allows any standard PC to act as a GPIB controller
without additional GPIB control hardware or Software.
Software Cartridge
The feature set for Gemini resides on a Plug-In Software
cartridge. You can easily add new test capabilities in the
future as they become available.

Estos manuales están disponibles para el equipo anterior:

Tipo de manual: Manual del usuario TelecomAnalysisSystem-8788-Manual-Page-1-Picture
Páginas: 182
Tamaño: 4.18 Mbytes (4380595 Bytes)
Idioma Inglés
Revisión: 2.1
Manual-/ número de identificación: 2700-1693
Fecha: 01 enero 1990
Calidad: Documento Scaned, todo legible.
Fecha de carga:
MD5: 46c52adde1fee3928ec1ef6debdc6bf4
Descargas: 165 desde 05 febrero 2017
This manual contains all the information you need to install
and operate the TAS Gemini 1022 Dual Terminal Emulator. The
manual is structured as follows:
The Introduction section provides an overview of Gemini
features and functions, and details the Gemini installation
procedure. Be sure to read this section before operating the
The Operation section describes the Gemini front panel and
menus in detail, and describes the procedures for setting up
and executing call setup, bit error rate and throughput
tests, and polling tests. This section also contains sample
test procedures.
The Menu Reference section contains detailed information
about each Gemini menu parameter. The organization of this
section matches the Gemini menu structure to facilitate easy
The Remote Operation section describes the Gemini GPiB and
RS-232 remote control interfaces. This section provides an
overview of the Gemini command set and command syntax, and
contains sample remote control procedures. This section also
documents the RS-232/GPIB Command Translator feature.
The Remote Commands Reference section contains a quick
reference to the entire Gemini command set and a detailed
reference for each command. This section documents the
format of each command, and contains examples of command usage.
The Status Codes section documents the status codes that you
may encounter while using the Gemini.
The Specifications section contains detailed specifications
and connector pin assignments.

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics