Kenwood SM-220 Otro
Fabricante:
Modelo:
SM-220
Fecha:
Categoría:
Grupo:
Descripción:
Station Monitor

Información

1. Station Monitor SM-220 is designed specifically for measurement of the TS-820 and TS-520 series SSB transceivers. 2. The unit is comprised of a monitor-scope, oscilloscope and two-tone audio generator. A Pan Display option is also available. 3. The monitor-scope will display transmitted waveform from 1.8 MHz to 54 MHz, 5W-2 KW PEP, and to 150 MHz, 100W PEP. Drive input terminals permit trapezoid waveform observation. 4. The oscilloscope features high sensitivity (better than 20 mV/DIV) and wide bandwidth (2 Hz — 10 MHz), and makes possible measurement of various waveform types. Receiver IF can be dispalyed directly from the TS-820S IF-OUTPUT terminal. 5. The two-tone audio generator provides 1000 Hz and 1575 Hz tone individually or simultaneously. 6. A plug-in Pan Display is available as an option: For the TS-820S, specify the BS-8, or for the TS-520S specify the BS-5, 7. Horizontal trace tilt can be adjusted from the rear of the unit without removing the case. 8. The blue-green (B-31) phosphor CRT assures excellent brightness and contrast for extended fatigue free viewing.

ver más

Manual de servicio
Type manuel:
Manual de servicio
Páginas:
24
Tamaño:
1.53 Mbytes (1604570 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2017 01 08
MD5:
1c0b31904a291d38e0d3e4de51b972e6
Descargas:
706

Información

CONTENTS Page SECTION 1. SPECIFICATIONS ... 3 SECTION 2. FEATURES ... 4 SECTION 3. CRT SPECIFICATIONS ... 4 SECTION 4. BLOCK DIAGRAM ... 5 SECTION 5. CIRCUIT DESCRIPTION ... 6 SECTION 6. VIEWS ... ... 8 SECTION 7. PRINTED CIRCUIT BOARDS ... 9 SECTION 8. PARTS LIST ... 10 SECTION 9. PACKING ... 12 SECTION 10. DISASSEMBLY ... 13 SECTION 11. ADJUSTMENT ... 15 SECTION 12. TROUBLESHOOTING ... 17 SECTION 13. PAN DISPLAY OPTION ... 18 SECTION 14. SCHEMATICS ... 23 ILLUSTRATIONS: Fig. 3-1 CRT Basing ... 4 Fig. 4-1 SM-220 Block Diagram ... 5 Fig. 5-1 Principle of Oscilloscope Display ... 6 Fig. 5-2 Displayed Waveform ... 6 Fig. 10-1 Front Panel Assembly Parts Blow-Up ... 13 Fig. 10-2 Case Removal ... 14 Fig. 10-3 Graticule Removal/Installation ... 14 Fig. 10-4 CRT Removal ... 14 Fig. 11-1 Adjustment ... 15 Fig. 11-2 V. ATT. High Frequency Response Compensation ... 15 Fig. 11-3 Two-Tone Oscillator Balance Adjustment ... 16 Fig. 13-1 Block Diagram(BS-5, 8) ... 18 Fig. 13-2 Ceramic Filter Frequency Characteristics ... 18 Fig. 13-3 BS-5. 8 Installation ... 21 Fig. 13-4 Pan Display Adjustments ... 22 Fig. 13-5 Pan Display Waveform ... 22

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
20
Tamaño:
2.85 Mbytes (2990211 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
B50-2856-00 (G) (K) (W)
Fecha:
1984 01 01
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2017 01 08
MD5:
3251bfe17fab2ab417a2ae6d2f3086b5
Descargas:
736

Información

1. Specifications ... 3 2. Introduction and features ... 4 3. Cabling requirements and preliminary instructions ... 5 4. Controls, indicators and connectors ... 6 5. Operation ... 8 6. Circuit description ... 12 7. Adjustments and maintenance ... 14 8. Pan display operation ... 14 9. Schematic diagrams ... 17 Illustrations and tables ... 19 Figure 3-1. Assembled U HF connector cable ... 5 3-2. Assembling a BNC connector cable.. .. 5 4-1. Front panel ... 6 4-2. Rear panel ... 7 5-1. Cabling for transmit and receive displays ... 8 5-2. TS-820S IF output matching ... 9 5-3. *Single tone input (2 examples) ... 10 5-4. * Keyed waveform (2) ... 10 5-5. *Two-tone modulation envelope (2) 10 5-6. ♦Voice modulation envelope (2) ... 10 5-7. *Trapezoid waveforms (2) ... 10 5-8. Connection forTrapezoid waveform observation ... 11 5-9. *RTTY cross patterns (3) ... 11 5-10. Cabling for RTTY cross pattern observation ... 12 5-11. *Lissajous' figure example (1) ... 12 6-1. Block diagram ... 13 7-1. Adjustment access (case bottom) ... 14 7-2. *Two-tone Oscillator waveform (2) ... 14 8-1. Installing the Pan Display adaptor ... 14 8-2. Pan Display adjustment ... 15 8-3. * Pan Display waveforms (3) ... 15 8-4. Pan Display output cable ... 16 8-5. TS-520 series IF sample cable installation ... 16 8-6. TS-820 series IF sample cable installation ... 16 ♦ Scope display examples (number of conditions illustrated). Table 5-1. Control settings, transmit signal observation ... 8 5-2. Control settings,Trapezoid waveform observation ... 10 5-3. Control settings, RTTY cross pattern observation ... 11 5-4. Control settings, oscilloscope operation ... 12

ver más

Hoja de datos
Type manuel:
Hoja de datos
Páginas:
4
Tamaño:
845.04 Kbytes (865322 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2023 02 15
MD5:
cbd8a070ed0c4420ec413feb1f624ba8
Descargas:
174
Manual del usuario
Type manuel:
Manual del usuario
Páginas:
25
Tamaño:
3.78 Mbytes (3964815 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
B50-2856-10
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2023 02 15
MD5:
d0940f882e6474b696a5db027a6c9778
Descargas:
286
Manual de servicio
Type manuel:
Manual de servicio
Páginas:
29
Tamaño:
2.88 Mbytes (3024929 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2018 04 15
MD5:
fe3b6821f4299ca9eea1771f15271109
Descargas:
612

Información

SECTION 1. SPECIFICATIONS ... 3 SECTION 2. FEATURES ... 4 SECTION 3. CRT SPECIFICATIONS ... 4 SECTION 4. BLOCK DIAGRAM ... 5 SECTION 5. CIRCUIT DESCRIPTION ... 6 SECTION 6. VIEWS ... ... 8 SECTION 7. PRINTED CIRCUIT BOARDS ... 9 SECTION 8. PARTS LIST ... 10 SECTION 9. PACKING ... 12 SECTION 10. DISASSEMBLY ... 13 SECTION 11. ADJUSTMENT ... 15 SECTION 12. TROUBLESHOOTING ... 17 SECTION 13. PAN DISPLAY OPTION ... 18 SECTION 14. SCHEMATICS ... 23 ILLUSTRATIONS: Fig. 3-1 CRT Basing ... 4 Fig. 4-1 SM-220 Block Diagram ... 5 Fig. 5-1 Principle of Oscilloscope Display ... 6 Fig. 5-2 Displayed Waveform ... 6 Fig. 10-1 Front Panel Assembly Parts Blow-Up ... 13 Fig. 10-2 Case Removal ... 14 Fig. 10-3 Graticule Removal/Installation ... 14 Fig. 10-4 CRT Removal ... 14 Fig. 11-1 Adjustment ... 15 Fig. 11-2 V. ATT. High Frequency Response Compensation ... 15 Fig. 11-3 Two-Tone Oscillator Balance Adjustment ... 16 Fig. 13-1 Block Diagram(BS-5, 8) ... 18 Fig. 13-2 Ceramic Filter Frequency Characteristics ... 18 Fig. 13-3 BS-5. 8 Installation ... 21 Fig. 13-4 Pan Display Adjustments ... 22 Fig. 13-5 Pan Display Waveform ... 22

ver más