Fluke 80E Voltage Source
Fabricante:
Modelo:
80E
Fecha:
1981
Categoría:
Grupo:
Descripción:
Voltage Divider

Información

The model 80E Voltage Dividers extend the measuring range of Fluke differential voltmeters. The Model 80E-10 has a maximum input voltage of 10KV. The Model 80E-5 has a maximum input voltage of 5KV. Other input voltages are available on request. Both 10V and IV output terminals are provided, which permit use of the 80E with Fluke differential voltmeters, or a null- type potentiometer. 1-3. A center zero panel meter permits observation of the approximate magnitude and polarity of the unknown voltage. In order to ensure maximum accuracy and long life, properly aged, wirewound resistors, having a very low temperature coefficient, are used throughout the instrument. The case of the instrument is suitable for either bench use or rack mounting. 1-4. This instrument has been thoroughly checked and tested before being shipped from the factory. Immediately after receiving the instrument, carefully inspect for any damage which may have occurred during transit. If any damage is noted, refer to the instructions outlined in the back of this manual.

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
31
Tamaño:
1.89 Mbytes (1986486 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
293860
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2016 01 29
MD5:
dbd47e3a5e116ad1456c8d60c078cb0b
Descargas:
647

Información

I INTRODUCTION AND SPECIFICATIONS 1-1 1-1. Introduction ... 1-1 1-5. Specifications ... 1-1 1-6, Electrical ... 1-1 1-7. Mechanical ... II OPERATING INSTRUCTIONS 2-1 2-1. Operating Procedure ... 2-1 III THEORY OF OPERATION 3-1 3-1. Theory of Operation ... 3-1 IV MAINTENANCE 4-1 4-1. Introduction ... 4-1 4-2. Troubleshooting ... 4-1 4-5. Calibration of 8ÖE-10 ... . 4-1 4-7. Calibration of 80E-5 ... 4-2 V LIST OF REPLACEABLE PARTS 5-1 5-1. Introduction ... 5-1 5-2. How to Obtain Parts ... 5-1 5-3. Use Code Effectivity ... 5-5

ver más